Recent content by mjhonline

thanks for all the advice.. better jump in the deep end and try to configure it then!

no the d-link is a dsl router.

the problem is that I have to keep the d-link as it connects directly to dsl, the pix does not have that ability.

hi, I've just inherited the task of setting configuring & installing a pix firewall which I have absolutely no experience in. We currently have a cisco 3600 link all remote offices, lets say this router has an ip address of 10.0.0.1 it currently directs all external traffic to a d-link dsl...

I f you do, be ready with the support telephone number for NAI.. you'll need it!

Hi, I'm trying to sync my 1 1/2 year old Toshiba E570 Pocket PC to Exchange 2003 ActiveSync and keep getting the error INTERNET_31 - any ideas? I know it can see the Exchange Server but just won't sync. Is it possible that I need to buy my new HP Ipaq 5550 running Pocket PC 2003 to get this to...

Ok, tell me if I'm being thick or missing the point but: Does VirusScan v7 Enterprise replace VirusScan v6.1.0 TC or is there going to be a TC v7.0 at some point to bring it in line? It just appears to me that ePO v3.0 is set to deploy VirusScan v7 as default. Any thoughts on the subject...

Is there a way of configuring Exchange 2000 to deposit all mail incorrectly addressed or mail with an invalid address to the postmaster mailbox? Thanks, Mike H.

Everything dialed from the 2620 IS inside, the link to the internet is from 192.0.100.9 Mike.

I've been playing with the configs some more to no avail: Latest versions of both are here: ! version 12.1 service timestamps debug uptime service timestamps log uptime no service password-encryption ! hostname CENTRAL ! logging buffered 4096 debugging enable password 7 password ! username...

IOS 12.0(17a) on 1603's and 12.1(9) on th3 2620. This is really confusing the heck out of me now!! oh, I have tried without the ppp multilink with no luck. To recap: 1603's connected to ISDN2e service 2620 connect to ISDN2e service with separate numbers for each 64K channel Help!!!

Right then, here's the output from debug ppp authentication. Mike H. For obvious reasons names & numbers changed: CENTRAL_SITE - 01234567890 REMOTE_SITE - 123456 ------------------ 4d00h: RELEASE pd = 8 callref = 0x36 4d00h: ISDN BR0: RX <- RRr sapi = 0 tei = 116 nr = 39 4d00h: ISDN...

Thanks for taking time to look at debug info below, I hope it means more to you than it does to me! Mike. Output of debug isdn q921: 3d05h: ISDN BR0: TX -> RRr sapi = 0 tei = 116 nr = 11 3d05h: %LINK-3-UPDOWN: Interface BRI0:1, changed state to up 3d05h: %DIALER-6-BIND: Interface BR0:1...

Right, where to start.. Central site has Cisco 2620 2 x remote sites each have Cisco 1603-R Central site can initiate an ISDN call to either site and once connected two way traffic is possible and all is well. However, neither remote site can initiate the ISDN call, and if you type 'sh isdn...

Thanks, I'll try it out and let you know how I get on. Mike.