Recent content by misterpops

Hi ! Call Microsoft and ask'em for NoMAS utility it will solve your problem easily....that's a GUI Cheers

Hey, Just in case you don't want to work even more, remember that Exchange standard edition is limited to 16 GB of Information store. So you should upgrade to Enterprise edition. Ciao !

I've the same problem. I just installed a new IBM 3583 with one LTO 2 drive and 36 medias.... (Backup exec 9 for win 2K (sp3)rev. 4454) The log is: Job Completion Status Job ended: Tuesday, September 09, 2003 at 3:12:56 PM Completed status: Failed Final error code: a00084ca HEX Final error...

Sorry, HSZ80 is SCSI and HSG80 is fiber

Can you tell exactly if you controller is an HSZ80 or an HSG80....your error message is telling HSZ but in you text your telling us HSG. If that's the case, maybe you didn't installed the good drivers but..... your the only one to know.

1. First of all. RAID 0 isn't used for a robust need. It's used for perfomance. You just add risks to get a disk failure. If you really want to use two (2) spindles, you need a RAID 0 + a RAID1 of your RAID 0. So this is commonly called a RAID 0+1 or RAID10 (need at least 4 disks) or also...

Yes with truimage 6.0 from Acronis

Hi ! Does anybody tried to use NRM with windows NT 4.0 terminal server and made it work ??? Do you have any commitment from Legato that it should work or You based your test on "it may work but it's not supported" ???? Thanks for any references ! Denis

Hi, Have you ever tried to transfer a file from one machine to the other ?? ftp, NFS copy or whatever else ??? If you don't get any decent speed at all, change (force) your adapters to half-duplex on the machines and the switch. Auto-detect provides you the ability to auto-detect the media...

Sorry about the language but that's simply a piece of sh.. I installed the product on 2 HP servers. The installation went well and also our tests but, there was a bug in the management console. We installed many patches but unfortunately, it went even worse. The Tech support, first level...

My question is really on the SNA server side. If I change my link to replace my old escon with an ethernet adapter, is there any white papers or tools that allow me to keep all the PU definitions, LU definitions and POOL (in fact everything except the Link) can we switch all those definition to...

Just remove the compression directive in your save set. If you backup NT stuff....check NT without compression. The hardware compression will be use instead of the software one's.

Is there anybody who have a white paper on how to backup a Legato co-standby cluster. We have 3 f them and one is for file&print, one for MSSQL 7.0 and the last but not the least, our MSExchange cluster. Do we backup each node as a single server or do we backup the virtual services ?? Thanks...