Recent content by mikenificent1

Hey John, so with MCR's for key 1 and 2, does the set behave exactly the way a phone with "normal" rollovers"?? I don't undertand exactly how they would hunt to each other... Thanks

Hi. How do you get the 2 line caller ID on incoming calls so that in addition to the number you see the name as well like you see on an analog phone you would use it at home? Not many PBX's use it but I have seen in use a couple of times on Option 81's. Secondly how do you configure the PBX to...

Ace: >are you trying to stop this phone from transfering any >calls? Yes >What model of phone? 3903 >Can this phone make LD calls? yes >Can this phone make local calls? Yes I want to know this so that I can restrict a phone in this manner but at the same time I'm trying to troubleshoot...

Ok. How do you restrict a phone (just 1) so that any call that is transferred goes to the attendant? thanks.

to the Attendant (console) on a per phone basis?

Thats is great. I just wanted to see the layout. Thanks a lot "one".

That is a picture of the KEY based expansion Module. Anyone else know where I can find a picture of the DISPLAY based expansion module? Thanks.

for the 3904? I've search the net but have only found text on it. Thanks.

Also, is there a way to disable it system wide?

Thanks a lot Sennback that is exactly the info I need.

Thanks for the info but could you be a little more specific? How would I call in, and do I use a standard auth code in LD 88? Thanks

I know for example with the Avaya G3 you can dial a certain phone number and barrier code from a remote location phone and use another PBX as if you were on site. Is there a way to do this with a Option 61? Is there certain packages needed? It is very useful in trouble shooting remotely. Thanks...

>...and recently got Name and Number between the Nortel and Avaya without QSIG.< Care to share how? Was it with PRI or without? Thanks Mike

Hi. Right now I have an Option 11C connected to a Definity G3si via a 24-channel T1 tie line (TMDI). I have an extension where the DID and voicemail box reside in the G3 and Intuity but the phone is on the Option 11; how can I get the voicemail lamp to light on a 3904 connected to the Option...

I had problem once where I moved a set multiple times via ASR and at one point the set would not come up. Is there any way to move the set out of the ASR table (LD 50 I believe) and put it back to it's orginal location via the TTY terminal?? Thanks