Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations bkrike on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Recent content by micsncics

  1. micsncics

    Second Line Drops

    f** XFTEST AND REMOVE ALL FEATURE CODES BEGINING W/ 9 REBOOT PHONE SYSTEM AND SHOULD WORK
  2. micsncics

    VOIP Gateway

    The norstar must have DTMF recievers available DTMF recievers are provided when using any of the following: services card combo card e&m trunk card
  3. micsncics

    PRI Auto Attendant

    MAKE SURE YOU HAVE THE SYSTEM ANSWER THE TARGETS NOT THE TRUNKS OR YOU WILL RUN INTO PROBLEMS
  4. micsncics

    CCR Question

    you can fool the system by using pool 1 then dial 9 if telco requires it WORKS LIKE A CHARM!
  5. micsncics

    NAM Alarms & Messages

    enough space is a routine check that the system does i believe 2x a day and if you look in the error logs it probably is 2x a day. your problem probably lies w/ congestion or traffic problems. you are probably using up all the channels simultaniously. Ask around if the people are getting an...
  6. micsncics

    External call from CCR only works half the time

    The amount of channels set for outbound dialing is probably set too low it is probably set to 1 or 2 channels and if one more simultanious call is attempted the call will fail.
  7. micsncics

    Lines appearing on KIM?

    Yes you can have lines assigned to a KIM, but you must first assign each phone that will have the lines to be a CAP(central answering position) I believe you can only have a maximum of 6 CAPS on a system, when you go into CAP assignment you will see the limitations of the caps and should max...
See more

Part and Inventory Search

Back
Top