Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations derfloh on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Recent content by micomms

  1. micomms

    Officeserv 7200 with SIP gateway over BRI

    I have a this OS7200 connected to SIP gateway (Neogate TB200) via BRI connection, and it generally works fine. The problem only comes when a local Samsung extension is forward to an external number. Callers to this forwarded extension DDI, receive no ring-back tone, just silence while the call...
  2. micomms

    Upgrade v3 to v9

    Thanks dude! Doing that as I type this.
  3. micomms

    Upgrade v3 to v9

    Ok thanks for the tip, I will export & import so I get a fresh config. There are some DSv2 modules, which should work on V9 (according to product matrix) I plan to upgrade the DSv2 mods to 4.2 first.. will they be upgradeable from 4.2 to v9 directly?
  4. micomms

    Upgrade v3 to v9

    I saved a config with Manager v3.2 and then opened this offline with Manager v8 (will try Manager v9 shortly), which seemed to work. I just need to find out if this config is actually ok, even though it looks ok.
  5. micomms

    Upgrade v3 to v9

    I should say, I am getting the licenses migrated to the SD card, and I've purchased an Essential Edition License too, so should be no other issues. And obviously I will need to move the 8DS ports to new locations etc.. I just want to make sure it is safe to get the config without any...
  6. micomms

    Upgrade v3 to v9

    Hi.. I am upgrading a client from IP406 v3.2(55) Main Unit an IP500v2 v9.0 Can I just use Manager v9 to take a config from the IP406 and then upload this straight to the new Unit ?
  7. micomms

    feature key service v3.2

    Hi all, I have a client who has an old IP406 on v3.2, and I am quoting them to upgrade the lot. I am trying to get hold of the Dongle Serial number without going to site myself. So far client cannot find the red or silver dongle on back of IPO or VMP server. I have asked client to look for...
  8. micomms

    Avaya CCR Real Time service won't start

    Yes I gave up, was spending way too much time on it anyway. Luckily the client isn't fussed about the historical data, they were just happy to get their phone system back. A few days back the UPS died and took the Main Unit down with it (IP500v1), so having everything online is the main thing...
  9. micomms

    Avaya CCR Real Time service won't start

    Hmmm, well since I didn't originally install the system that will be a problem to locate :\ I might take a guess and just change it in sql
  10. micomms

    Avaya CCR Real Time service won't start

    Have uninstalled the lot, and reinstalled sql2005 and ccr6.1 Restored the 2005 database, but as I thought the same problem. IPOCCR Real Time Service will not start Event log shows: Audit Failure, Login failed for Avaya SBCCUser (local machine) What is the password supposed to be for this ? I...
  11. micomms

    Avaya CCR Real Time service won't start

    I do have the original ccr v1 supervisor account credentials, which I think was also the same account assigned as the administrator account. It's just that I can't login as either supervisor or administrator after the sql2005 restore, so I strongly think I have broken something else in SQL.
  12. micomms

    Avaya CCR Real Time service won't start

    When you say copy a supervisor password into the administrator account, I am not sure I can do that, since I have tried all the CCR login passwords that ever existed to my knowledge, including the administrator & supervisor (the same account in this case)
  13. micomms

    Avaya CCR Real Time service won't start

    Yeah, I thought that I may have to do a full rewind back to SQL 2005 and upgrade properly, but I am trying to avoid it if I can. As I said, when I was on SQL2005 with CCR v1, this was also working I believe, but then I started poking around SQL trying to work out what the CCR Administrator...
  14. micomms

    Avaya CCR Real Time service won't start

    I have CCR v8.1 and just upgraded from SQL2005 to SQL 2008R2 (Ip500v2 v8.1.43, VMPro 8.1.8902, Server2003 SP2 with all CCR prerequisites, all on a single server). My brand new CCR install was working perfectly on a fresh new database... until I restored the SQL2005 database. Now the CCR Real...
  15. micomms

    NEC Neax 7400 help

    FYI..had a win on this job. New ISDN and phones all working smoothly.
See more

Part and Inventory Search

Back
Top