Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Rhinorhino on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Recent content by mickth

  1. mickth

    SVDATA to copy missing company?

    We created copies of our companies last year, and have since switched laptops that MAS90 runs on. Now those backup companies don't show up. How do I get them to show up? In other words, we copied company NEW to N08 so we could have access to certain GL data. Then in January, we switched MAS90 to...
  2. mickth

    Anyone have any Telemagic experience?

    Hello, We are using an old version of Telemagic. V12.5 We had a server crash the other day. We have all of the data (tmcustmas.dbf) but we don't have the system directory that TM needs to run. There is a directory it creates called \tmsysdir\ that houses a few system files. One of the files...
  3. mickth

    Vrepair/FAT question

    Well, there are two SCSI cards, and two hard drives. I disconnected one SCSI card and one hard drive. I'm not sure I Would know the process of clearing off the second hard drive. Mick
  4. mickth

    Vrepair/FAT question

    Hi Marvin, THanks. I actually did try those ideas. When I tried both of them at the same time, it didn't finish running vrepair. Then I just switched it to not delete the purged files, and it finished running vrepair, but when I load the volume again, it gives me the message about the...
  5. mickth

    Vrepair/FAT question

    We are running NW 3.2. So, we had another serious power outage. I am able to run Vrepair, however when it tries to complete the process, it says it can't complete do to a Write/FAT problem. So is the FAT table on the drive damamged? or is there an internal NW FAT Table that is damaged? Mick
  6. mickth

    Vrepair / Name Space question

    Thanks for the suggestion. I was able to tell vrepair where v_os2.nlm was, using the "searc add...." feature. So vrepair ran succssfully yesterday. However, about 2 hours after it ran, I got the same error message. I ran vrepair again, and the second time I told it to make a text file so I could...
  7. mickth

    Vrepair / Name Space question

    So, could the problem be with one (or both) of the SCSI controllers? We're using the 2940-U2W cards. If it were hard drive related, wouldn't it not run at all? I'm still wondering if I can somehow load V_NFS.NLM, for VREPAIR to be able to run. Mick
  8. mickth

    Vrepair / Name Space question

    Nope. not so lucky. Still getting the problem. Mick
  9. mickth

    Vrepair / Name Space question

    Could/Would a power supply cause this behavior? I replaced the power supply, thinking maybe the outage (possible surge) could have damaged the power supply. There was a light fixture in the same room that had to be replaced. Anyway, it's been up for a few hours now. Mick
  10. mickth

    Vrepair / Name Space question

    Can it be temporarily removed, while vrepair runs, and then re-installed? Or will that trash the longer filenames? Also, can I run V_NFS.NLM on version 3.2? or is that a newer feature for a newer version of Novell? Mick
  11. mickth

    Vrepair / Name Space question

    Hello all, We are running Novell 3.2 We had a power outage today, and although I can load our Volume SYS, it only runs for about 2 hours, and then locks everyone out, saying that the drive has deactivated. I tried to run Vrepair, but it stops and says I should remove support for Name Space...
  12. mickth

    Novell 3.12& XP -- What version of Netware Client?

    Thank you! This helps tons! Thanks again. Mick
  13. mickth

    Novell 3.12& XP -- What version of Netware Client?

    We're doing the same thing. I've downloaded V4.91sp2. Now what? How do I run a "custom" install? Once the install starts, will it prompt me to choose IPX and Bindery over NDS? The 49sp2.txt file says says a prerequisite is NDPS and Netware 4.11. ???? Won't this work on 3.2? Mick
  14. mickth

    Problems with bgcolor

    Well, it was the "Use High Contrast" button. For some reason it was checked. Thank you Dan. I'll head over to the Javascript forum to work on my State/County problem. I'll be back here sometime when I start coverting over to CSS. I can see how much better using CSS will be in the long run. Very...
  15. mickth

    Problems with bgcolor

    Well, I made the most basic of CSS sheets to work with. The only thing in it is: body {background-color: #333333} That is the dark grey color I'm after. It works in everything but XP/IE6 (still shows up white). So, I guess my IE6 has a setting that is messed up? Any ideas? Mick
See more

Part and Inventory Search

Back
Top