Recent content by mextera

sounds like a memory issue, to resolve delete the ext off the port example 10>XXX>CCC Delete the ext number in programming before moving or reassigning the ext assign ,multiple phantom ext's 10>500>F900 10>501>F901 10>502>F902 then reassign the correct ext in a usable port. This will keep...

Tried a capture on web pro but system is not seeing registration attempt. Then it is an issue leaving the Phone, check proxy settings XXX.XXX.XXX.XXX:5060 Mextera

Ok so this is usually a programming loop, check CFW's and LCR if networking Mextera

command 93? Mextera

Again this is IVS it does not have TCP/IP Mat connectivity. The AP01 is only used for OAI/ACD Mextera

Program the Button via command 9000 Program Speed dial names via command 74 and upload the changes via command 1229 Mextera

Turn off Back Ground Music. Mextera

what kind of mail? if its an active voice then press ***. If you just do as stated above the call will still be attached. Mextera

Matworx 32 does not have a view for Call Forward Mextera

are you using BLF over CCIS? make sure you have correctly set 1340. Mextera

www.2000stuff.com (pave35) He writes many IVS to IPS cheats. Mextera

check button 00 and 90-99 Mextera

everyone here is to kind. If your a "newbie" then let some who can do it show you make the service call it will be worth it. Mextera

The IPS can do SIP Trunking using the 8IPT card. somethings to consider and research is what protocol do you need and what is supported. Mextera

cancel out and do not pick a terminal type. Mextera