Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations wOOdy-Soft on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Recent content by mevalery
-
Unable to set write cache to enable
Thanks for the quick and accurate responses. I wired up the 2 extra power supplies and the cache was enabled, without having to replace the one bad disk. -
Unable to set write cache to enable
At the moment, I haven't changed the configuration from when I purchased the FC5310 and 1 DAE. I copied how they had it wired for communications and power. For faults, I have one disk that is bad and has been replaced by a hot spare. Would that stop me from enabling write chache? I don't have a... -
Unable to set write cache to enable
I have a FC5310, which reports itself to be a FC5200. I tried using the following 2 commands to enable the write cache: ./navicli -h hostName -d clsp0 setcache -wc 1 ./navicli -h hostName -d clsp0 setcache -wsza 188 -wszb 188 -wc 1 -p 8 -rsza 50 -rszb 50 -rca 1 -rcb 1 Neither command effects... -
Not getting the fcli> prompt on my FC5310 iDEA
Octorian, Thanks, having you mention it again ( I had already read your page last night), made me read it again. I had misinterpreted it the first time. I've got the fcli> choice now, so I know I can start to update the sun server that had been controlling the emc box. I was putting it off... -
Not getting the fcli> prompt on my FC5310 iDEA
I recently purchased a clariion FC5310 iDEA and a single DAE and I've gone through the posts about using the serial console to get to the fcli> prompt. I'm actually plugged into the SPS which is connected to the iDEA, but I don't know if it makes any difference. I'm able to break out of the...
