Recent content by meganwhite

Thanks for all the help guys I got the files transferred

yes i have the crossover cable. I tried to use a hub and the linux os connects to another linux pc when I mount the ip of that pc, but does not recognize the ip of my pc running on xp. If I try to ftp from the pc with XP I get the message connection refused by host. Is there any possibility I...

I have a pc with red hat linux installed and I need to transfer some files from it to another pc which has windows XP os. I do not have internet but all I have is a patch cable. How can I ftp the files ? Any sujjestions?? Megan

Hey guys I have a Vaio notebook and XP professional OS installed in it. When I boot the system the taskbar show up but its contents does not and when I take the curser to the taksbar the hourglass shows up as if its running infinitely.The windows key or start ket does not work either. Also my...

Thanks cyoung, I was using the usb but it worked fine with a rs232. Megan

I recently bougt a bar code reader(Symbol LS 2200/2208). Does anyone know where can I get the Linux driver for it or how to use it with the Linux operating sys? It works fine with Windows XP but I need to use it with Linux.

That's what I too think. I haven't bought the processor yet but now I am kinda confident. It would be helpful if you can give me some tips to perform this in the BIOS. Megan

The CPU is Advanced Digital Logic MSM855. Its used for embedded applications and not in Laptop. If the CPU speed is changed in the BIOS does it matter which oper sys is running? Shouldn't the CPU speed be same for all Oper sys after once it is set ? Thanks for the suggestions guys Megan

Hey Guys I have a 1GHz processor and I need to slow it down to .6GHz. The vendor says I can do it if I have an XP operating sys but I am using a Linux OS. Is there any way I can adjust the speed by going into the bios? I need to lower the speed to conserve power as I am planning to run the pc on...

Thanks for the help guys Megan

Thanks for the sujjestion. My concern is to save space as well as money as a wireless access point will be costlier than a PCI card. But on a technical point of view do u thing it will catch signals if connected to an external antenna? Or it won't work at all?(if we neglect the warranty just for...

I want to know if it is possible to connect the Linksys wireless PCI card WMP54G into the desktop and then remove the small antenna and connect a cable to extend it to an outdoor antenna. Will it access an access point in the next building? Let me know if anybody has tried this. Thanks

Hey guys I just wanted to know if there is a driver for Netgear wireless PCI adpater MA311 for Linux Operating system. Also can we romove the small antenna and connect it to a booster to increase the range to 75 mile(500mW booster amplifier)?

How can I generate a netlist from a Xilinx project Navigator schematics(.sch) file and use it in Modelsim for simulation.

Hi guys I need some help to minimize the logic in my code in order to fit it in the fpga. Basically what the code does is as follows: From a 32 byte input data I have to retrieve 112 bits and transmit them serially. the code is lib..... ieee.... entity... port( ... Data_1 : in...