Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Chriss Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Recent content by Megajd

  1. Megajd

    Opt11 rls24.24

    Thanks very much. Worked like a charm.
  2. Megajd

    Opt11 rls24.24

    Hi I have a sick rls 24.24 option 11. Would anyone have a copy of the 24.24 install files? Thanks
  3. Megajd

    Cell Twinning Call Id

    I pay for the service and it works fine, unless in this twinning situation.
  4. Megajd

    Cell Twinning Call Id

    I've tried to set up mobile twinning on a ucx20. It works well, except there is no name display on the cell. The number is displayed, but no name display. It seems to be stripped off by the UCX. The desk phone displays both name and number. It's probably a setting, but being new to these...
  5. Megajd

    Our BCM 1000 was hacked...

    Make sure COS-7 doesn't have outbound transfer. It's default for mailbox 102 ( SysMgr) Most Customers don't change the password to something better than 1234.
  6. Megajd

    Customer's DHCP server and BCM e/w 1140e's

    We have a BCM50 Rls.2, but do not want the BCM to hand out IP's to the IP sets. Instead we have a DHCP server for that. My question is; Is there a way of sending a setup packet that would give the IP set an IP, as well as giving the IP set the S1 and S2 IP's, and the appropriate port ( 7000)...
  7. Megajd

    9150 Xtalk

    I installed a 9150 at a remote office. It has ISDN local lines (BRI) for local calls, and a private T1 for VOIP calls to and from the Option 11. About once a day and only on local incomming calls, crossed lines are experienced. The ISDN lines are set up for group hunt(as called for in the...
  8. Megajd

    Digi RAS board connected to a BRI card in OPT.11

    I cannot get a Digi RAS board (Remote access Server) to register on My BRI card. Currently I have a Video conference unit and a back-up Data link (128k) all working on the card now. The TEI's do not register properly. The proticol called for by Digi is NI1. This board has a capacity of 8...
See more

Part and Inventory Search

Back
Top