Recent content by mdtech

I'm replacing a GBP9 GSM with a GBP8 in order to expand a 24 PCM link system to 31 links. Can someone please tell me where to place the GSU3-GRU cables? Can you also explain the logic behind it?

Wow, thanks for all the great responses. This is actually a licensed lab system that I can restart at will. I've tried different NUMSE,BPOS and even different ELU29s. A more detailed fault report would be that once I CNBOI the board it shows up passive in CNLIP. I then EXTEI, as stated, and get...

I'm working on a BC11 systen that has never had analog extensions. I must be brain dead because I can't initiate analog extensions. The system gives me the following: <EXTEI:DIR=3220&&3235,TYPE=EL6,TRM=0,EQU=1-0-52-0,TRAF=00151501,SERV=000212070,CDIV=000071121,ROC=020001; WAIT WAIT WAIT FAULT...

Thanks all for your help. The customer gave us the wrong phone number and we were connecting to another modem. Let's close this one out.

We've been connecting to a Octel 250 for years with WYSE 50 emulation. Now when the modem answers, we get no response.We reset modem and still the same. I don't want to restart the Octel unless someone else has found this to be the fix.?????????

Prior to DBC2xx, digital instruments had single mode codecs for either A-law or µ-law. I've been told that /// has devised a way in BC12 to allow both A-law and µ-law DBC6xx phones to work on the same switch. Can someone confirm this and explain how to implement it? Also, are there any...

My understanding, from reading ALEX BC12, is that when a user calls the IV from an inside extension they have to enter in their mailbox number. Can someone out there with IV verify this? If it's true, is auto login in the works?

Since MDN's can be set for immediate answer, can they be used as a 30 member hands-free paging group? If so, is talkback allowed?

Can someone tell me how to default a webswitch 2000 or otherwise bypass the password that the last administrator entered? Thanks

Hi Maxpipeline ! The TAOs can be found at...

I have a couple of Avaya R300 a.k.a. Max 3000 VOIP routers that I'm trying to use as gateways on my MVAM managed network. They register as gateways and are admitted when used as an ingress endpoint with all proper routing performed. However, they fail to recognize the egress endpoint as relayed...

MUCHO THANKS FOR THE INFO SYAR2003!

CAN SOMEONE PLEASE TELL ME THE DIFFERENCE BETWEEN ROF1375428/1 AND ROF1375416/2. THANKS

THANKS SYAR2003 FOR THE RESPONSE. I'M AWARE OF THE REMOTE DPNSS OR PRI QSIG CONNECTED TO A HOST MD WITH VOICEMAIL. WHAT ABOUT GETTING THE HOST MD TO SIGNAL TO A VOICEMAIL THAT IS DIRECTLY CONNECTED TO IT. I GUESS WHAT I NEED IS FOR THE MD TO EMULATE A CENTRAL OFFICE ISDN. THANKS AGAIN SYAR2003!

I'D LIKE TO CONNECT A VOICEMAIL SYSTEM THAT CAN BE CONFIGURED FOR ANALOG PORTS OR ISDN. UNFORTUNATELY IT DOESN'T SUPPORT SMDI SERIAL SIGNALING. I REMEMBER THAT PRIOR TO BC5, THE MD110 USED IN-BAND SIGNALING. IS THERE A WAY TO GET IN-BAND OR ISDN SIGNALING FOR VOICEMAIL IN BC9 OR LATER?