Recent content by MBX

You may try enabling your digital station as a data set. We run ld 30 every night and our sets are not disabled, hopefully you will have the same luck if you set the following. ld 11 CLS FLXA Good luck, David

Hi acewarlock, I must run the 30 in mids because my customer insists. It is a large multi-PBX location and they seem to think this is a must. Can I get OVLY 32 to re-activate my digital ports during the mids run automatically? My customer is non-to-keen on doing it manually evey morning on 15...

Hello sureyyaayce, I am sorry, but I don't get it. Do I make a change in LD 20 and then in VAS? If you would be so kind as to list the steps and loads in order, I would greatly appreciate it! Thanks David

Hello, I have digital phantoms that the midnight routine disables when OVLY 30 is run (I must run OVLY 30). Can I change the loops that OVLY 30 tests (my phantoms are on one loop)or somehow stop the removal of the stations? Or can I somehow make OVLY 32 enable them again (as Nortel Doc's claim)...

Hello, I have built several phantom stations on active loops and need a way to allow the daily maintenance to run (Midnight Routine OVLY 30) and either not remove these phantoms, (all on the same loop) or; run OVLY 32 automatically and reinstall them. If I could simply disable OVLY 30 in the...

Hi dmb, The unfortunate truth is, Nortel does not support join call through their CTI link. We struggled with this for a while and even enlisted Nortel's crack technical assistance team (at a cost), who reported back; "Yup, Nortel can't merge calls through CTI, never have, never...

I need to change my voice mail number and have many telephones to update. Is there a global command I may us to update my CFNA on all my telephones? Thanks in advance!

Great! Thanks Reusser! I'll give this a try. David

I need to configure digital phantom stations on my option 11 and option 81 PBX's and stop the midnight routine from deleting the phantom stations. Here is the hard part; I cannot build these phantoms on phantom TN's because they must be digital phantoms and I can only provision analog sets on...

Hello all, When I call out from an extension on my option 11, r25, the CLI the called party receives is the main number of my DID truck group. How can I make my extensions CLI appear to the called set? Thanks!

Hi Colin, Our settings are EXTT YES and TRNX YES. Thank you for taking the time to help us, this is quite a bit more critical than I can describe here. Best regards, David

Great news group, however; on virtually every post I make, someone asks for more details or has a question of some sort. How does one respond to an individual directly?

Hi Colin, We are trying to change answ/disc supn for a couple of reasons. First, our trunk is an ISDN e30 (Europe). Most importantly, we need to complete a conference call to an outside number, before that party answers. Strangely, we can do this if we create a conference call to the PSTN of a...

How do I set Answer/Disconnect SUpervision (supn) in LD 14 of my option 11, release 25? When I type chg (change) then hit enter through the various changable options, supn never appears? I am trying to enable the completion of a conference call, before teh called party answers. Thanks!

Hi Reusser, Thanks for the advice! We want to play a ring tone to callers we put on hold or in queue becasue we are preparing to connect them to an outside line. Our problem is producing a quality ring tone. What we are doing is recording a ring tone on a Voice Mail greeting, then the call hears...