Recent content by mbarrow

Can't access the PDM as we have ungraded software from 6.1 to 6.3 but do not have the PDM for 6.3 Where can I get FUNKs SteelBelt Radius? Thanks in advance

Does anyoe know any software/command that monitors VPN connections in realtime? We are using a PIX 515 with ipsec(AES) and our staff are using client version 4.02 to connect. Thanks

I've been told that this work work period....something to do with the subnet of the VPN ip pool. Don't know if it's true or not. Thanks anyway

When connected to the VPN I can't ping anything on the site B network (168.50.1.0) Marc

Hi joerocket. There is one router on site A network and another on the end of a circuit which connects site B. The VPN is a client to site A. Thanks

Guys, I have setup a VPN using PPTP & IPSEC and have a couple of questions: - Site A - 192.168.5.0 (This is where the PIX is) VPN IP Pool - 192.168.12.0 Site B - 168.50.1.0 1. When connected to the VPN i can ping anything on Site A network. I added Site B network in the routing table of the...

Hi, I'm having problems with https. We have a webserver hosting a website on port 80 which works fine. I am tring to open port 443 but am getting "page can not be displayed" yet my hitcnt on port 443 goes up by 2. Any idea's welcome. Marc

FX45 I already have an access-list between the 192.168.5.0 and 192.168.12.0 network. I was missing the nat (inside) 0 access-list vpn. I have now added this and it is still not pinging or connecting to anything on the .5.0 network. Do I have to add an access-group? When i connect through to...

Hi thanks for the reply. I've tried a tracert to a pc on the 192.168.5.0 network and am getting a timeout straight away. Thanks

Hello, This is really doing my head in and i've been trying for days without success. I'm trying to configure a vpn using IPSEC or PPTP. I can connect using vpn client 3.1 but can't ping nothing, do I have to create a route between my vpn ip address and the local ip address? and i can't...

Thanks again for the reply. Forget about the host, I want to get access to my intranet via the internet. I've tried: - access-list 100 permit tcp any host 80.4.185.--- eq www And i've cleared the xlate table but still not getting access. I can't ping the static IP address, but when i type...

Thanks for the reply. The pcanywhere host and the intranet that i am trying to connect to are on the same internal IP address, what effect will this have on the access-list? Can it be done?

Hello, Can anyone please help me as I have been trying (unsuccessfully) for the last week to get access to a pcanywhere host and intranet. I've looked up past posts and i'm not getting anywhere. Current Config PIX Version 6.2(2) nameif ethernet0 outside security0 nameif ethernet1 inside...

Thanks for the reply. We are accessing the database over a mapped network drive on an LAN. The database gets corrupt so badly that I can't do a repair or compact, i've got to restore from backup. Any ideas???

Can anyone help? Can you use Access 97 in Windows XP? Just had a couple of new pc's with XP as an OS and they keep on corrupting the access 97 database (working fine in 95/98). Has it got anything to do with 32 and 16 bit applications? Thanks Marc