Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Chriss Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Recent content by maxence

  1. maxence

    R9 : Slow connection with Manager

    is it normal ?
  2. maxence

    R9 : Slow connection with Manager

    Hello, I have 2 IP Office 500v2 R9.0.2 for 2 customers (2 different LAN) I am surprised for the slowness connection with Manager to load configuration of theses IPO.. I have never this problem with IPO < R9. Does somebody have already had that ? Best regards.
  3. maxence

    Voicemail for user

    Hi, I can define a maximum time of recording for a voice mail of users. BUT can i define a number of message maximum for a voice mail of a user? IP OFFICE 500 V1, R8.0 (voice embedded) Best regards :)
  4. maxence

    Discover on phone when VPN site was disconnect and reconnect

    Theses 20 phones dont reboot, after several hours. They are blocked => "Discover XXX.XXX.XXX.XXX" This only happens on the 2nd site on VPN.
  5. maxence

    Discover on phone when VPN site was disconnect and reconnect

    Thank but i dont use this method. There is no alternative ?
  6. maxence

    Discover on phone when VPN site was disconnect and reconnect

    Hi, I have 2 sites : - 1er site : IPO500V1 R8 + 40 phones ( DHCP with IPO500) - 2nd site : connected to VPN on 1er site (IO500) + 20 phones (DHCP with CISCO router) When the VPN was disconnect, and reconnect, the phones on 2nd site are locked to "Discover XXX.XXX.XXX.XXX" I must to...
  7. maxence

    Forward Call with same trunk SIP : No Voice

    COOL !! RTP keep alive : work fine ! Thank :)
  8. maxence

    Forward Call with same trunk SIP : No Voice

    In addition, when i active "annoucements" for a user, these forward are OK
  9. maxence

    Forward Call with same trunk SIP : No Voice

    Hello, Is that this problem still exists? => When i forward a incoming call (trunk SIP) by a same trunk SIP i have no voice .. Now my ipo is in R8.0.44 I trie this : - check or uncheck "REFER" in SIP Line => same problem - check or uncheck "RE-INVITE" => same problem I must use a second...
  10. maxence

    Hi, I have same problem that thi

    Hi, I have same problem that this thread : http://www.tek-tips.com/viewthread.cfm?qid=1656530 Alfonso said : "I forgot to cancel this thread. I solved it forcing the protocol in both, sip=trunk and IPDEC line." forcing protocol ? => do you have fix same protocol = CODEC ? for example you...
  11. maxence

    The caller does not hear me sometimes

    IPOV1 R8.0.18 Incoming call and Outcoming call : Trunk SIP Phone : 5402 (Numeric), 5602 (IP), 1616 (IP) Sometimes, the caller does not hear the customers..with 5402 avaya OR 5602, so there are no problem on network lan. Trunk SIP it works well for 1 year..i dont understand. This problem may...
  12. maxence

    I dont log extension on a 9620 phone

    Hi, IPO 500 R6.1.20 I have 1608 phones and 9620 phones. The 1608 phones are connected and with extensions : it's OK The 9620 phones are connected and with theses extensions : it's OK BUT i have a error with a only 9620 phone, i cant connect this phone with a extension (454 on this example or...
  13. maxence

    2nd annoucement for user ?

    what ?
  14. maxence

    2nd annoucement for user ?

    Hi, I dont understand in doc the "2nd annoucement" in the user tab "announcements" The first announcement is holdmusic.wav : OK. But what is the 2nd announcement ? I thought that it's holdmusic2.wav (i add this in source announcement in tab "system/telephony/tones and music"). But when i test...
  15. maxence

    Voice Embedded IPO500 R7.0.23 : no music on hold suddenly

    Hello, IPO500 Release 7.0.23. I just have a music on hold for users everything worked fine BUT, suddenly, this music on hold does not work, i just have tone... I stop SD card I start SD Card everything worked fine Do you have an idea ?
See more

Part and Inventory Search

Back
Top