Recent content by mattyjenks

Change the guest user password... works for me...

I probably know the awnser already.... but is the uniclient software free????

can anyone tell me what the usb port is for on these phones... Some of our users have found them and want to plug them into their pc's I cant find anyting in the optipoint manual or the realitis manual...

helper address's are dhcp relay address's ie pc - router1 - router2 - dhcp server the helper address would sit on the ethernet interface of router1 and passes any dhcp request to the defined dhcp server (havent worked with routers for a while so someone may correct me)

From the Cisco Technology Update: The Catalyst Express 500's are directed at the 'magazine purchaser' ie mailorder... If you want a 'proper' Cisco envionment go for what you know... 2940 - 6500

Hi all, I have recently started to recive the following snmp trap from a test 2940 to my test NMS (SNMPc) i guess it shows that my NMS is telneting to the 2940. I havent changed anything config wise and the test network is completely isolated. Any suggestions why its started sending them, and...

Thanks, Thats what ive already worked out but just wondered if i can turn it off by default and just turn it on on certain ports (336 extra lines of config to turn the linkup/down off makes the config considerably larger)

Hi all, I have a 6509 and i only want to monitor the status of the fibre ports in the supervisors but if i turn on linkup/linkdown in the snmp traps config it turn it on for all ports. i can turn it off for all ports that i dont want with "no snmp trap linkstatus" but this makes the config...

Thanks for that... but the numbering of the acls doesnt matter eg they could be 1, 4 and 8??? Regards Matt

Hi, Just a quick question regarding ACL's on catalsyt switches.... I need to create an access list for SNMP NTP and Telnet from restricted hosts... do they need to be in specific ACL list numbers or can i simply have access list 1 SNMP, access list 2 NTP etc Many thanks Matt Jenkins

Many thanks for both your replys.... Could you give me a rough sizing for approx 300 devices with config downloads once a week stored for 6 months??? Obviously the db size would depend on the config size etc... but a rough size would be helpful... Matt

Hi, My organisation is looking to get Ciscoworks 2000 for config up/download, inventory and other bits and pieces... Could anyone tell me roughly how big the ciscoworks database is per device....... We have approx 350 plus devices and we just wanted to roughly size the server capacity/backup...

Heres the output from the Cisco Output Interpreter %IP-6-UDP_SOCKOVFL (x1): UDP socket overflow from Source IP:[chars], Destination port:[dec] Explanation: This message indicates that all buffers for a UDP socket on the Network Management Processor (NMP) have filled up due to excessive UDP...

Does anyone have the MIB file for the DX (runing ver 8.0) Regards Matt

EX for extension