Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Recent content by Matt3167

  1. Matt3167

    Upgrading Novell Server

    Thanks to all who responded, everything was a success. I now have 130gig available on my server where just last week I was down to 5gig...........Thanks again.
  2. Matt3167

    Upgrading Novell Server

    Over the weekend I removed the 6-9gig drives and installed 6-36gig drives, that procedure went well. I ran CPQONLIN to create the 2nd logical drive. My array config now shows 2 logical drives, drive 1-43gig and drive 2-130gig, how would you recommend adding the additional space to the logical...
  3. Matt3167

    Upgrading Novell Server

    If I replace a 9gig drive with a 36gig drive in a 9gig RAID-5 set, will all 36gig be used in that RAID set, or will we still only use 9gig of that 36gig drive?
  4. Matt3167

    Upgrading Novell Server

    I have 9gig Ultra2 drives and the new drives are 36gig Ultra3 drives. Because they are different drives, will I be able to swap out disk by disk letting the RAID restripe? or do I have to use the DSMAINT procedure? If so does anyone know the TID # for the DSMAINT procedure?
  5. Matt3167

    Upgrading Novell Server

    I have a Compaq Proliant 1600 configured for RAID 5.
  6. Matt3167

    Upgrading Novell Server

    salserocito, I am replacing my six-9gig drives with six-36gig drives. I am replacing the drives, not the server. Does the DSmaint procedure apply to my situation? And if it does where are the instructions?........Thanks
See more

Part and Inventory Search

Back
Top