Recent content by matinau

Scenario: -One incoming SMTP server running Exchange 2000, filtered through a limited NAT. -Emails designated *@domain.com are to stay on the Exchange -Emails designated *@server2.domain.com are to be relayed to a separate internal SMTP server. Can anyone walk me through this? Thanks, Matt...

AH. Everything has been working fine with this setting. Now I'm told that the arrow keys do not work properly... Any thoughts? Thanks, Matt M. Morris mattm@mattm.net

Annihilannic: Excellent! This setting in my users' .profile with the combination of Putty's Terminal setting Implicit CR in every LF, makes it work! And there is no impact on the telnet sessions or the ssh sessions from other unix servers! Thanks!!!!! Thanks, Matt M. Morris mattm@mattm.net

Putty 0.52 is what we've been running. The client has several offices all running this version of putty running over telnet, so I'd rather not have to upgrade or change to a different terminal. It's "echo set your stty erase" in the .profile (sorry for not including that) to remind...

Ladies & Gents, Having fits here with a SCO OS5 Server. I've installed SSL and SSH pre-compiled versions, courtesy of pcunix.com and AP Lawrence. ssh_3.1p1_os5+prngd.tar ssl_0.9.6c_os5.tar Everything works great when I connect up from another unix client. HOWEVER, when I try to use Putty I...

Scenario: Dell Optiplex with adequate CPU and memory running as a companies website and business firewall. Once every few months, the box freezes up. Screen shows the last few sucessful and unsucessful login attempts. No keyboard input allowed. Reboot & everything is OK for another few...

SOLUTION: Everything on the SCO server and the HP Printer were setup correctly. This setup ran over a TimeWarner RoadRunner Cable Modem Service in San Antonio, TX. After a lot of probing and packet sniffing, we found that the ISP is filtering out the 515 port, needed for printing...

fortunat, where is your site? --Matt Thanks, Matt M. Morris mattm@mattm.net

I've been requested by a client to do this, too. The software packs out there don't seem too integral with a Consultant mindset -- more being devised for the permanent IT professional. Anyone out there doing Network Analysis and Documentation at client sites? Happy with a particular grouping...

SUMMARY: The modem must be configured as 56k in the config section. It defaults to 19.2 and will not work. Thanks, Matt M. Morris mattm@mattm.net

We've found that the printer works perfectly either on the local SCO network or on a Bell DSL line. However, it's not working behind the Time Warner Road Runner service. Have had 2 others verify and confirm the setups of the NetOpia and of the SCO. It has to be a Road Runner issue. Will post...

Having a problem getting my HP 320LX to work using a Megahertz PC card. - All country, area codes, & phone numbers are correct - Terminal works with this modem. - Remote Networking gives a No Carrier error - bFax gives a No Carrier error Does anyone have this combo? Thanks. Thanks, Matt M...

Having a problem getting my HP 320LX to work using a Megahertz PC card. - All country, area codes, & phone numbers are correct - Terminal works with this modem. - Remote Networking gives a No Carrier error - bFax gives a No Carrier error Does anyone have this combo? Thanks. Thanks, Matt M...

Removed the NAT issue and the NetOpia completely from the issue. Plugged the LJ5 into the Cisco & assigned the external IP directly to the LJ5. Still the same issue. Hauled the LJ5 over to the office with the SCO printer; off the Cisco. Changed it's IP and the IP of the printer in...

Thanks for the reply! 1) No -users- in the deny field. However, I did find some documentation for SCOAdmin that points to a hosts field of this sort. My version does not have this though. 2) Model= HPLaserJet, standard, hplaserjethpnp, and a few others tried with the same results 3) text/PS...