Recent content by maripaq

That's why I don't understand because we only have digital sets, the users use a button on their phone and don't have a clue on what is a SPRE code...

I understand if the user is using an analog phone but what about trying to pickup a call from a digital set?

I changed the SPRE from 1 to 1111 to free that number range but then all of the system Call Pickup Groups no longer work... Any Idea? Thanks.

thread798-1637211 I have an OP81C running Succession 5.0 and a Cisco Call Manager Cluster (8.6.2) in a CDP configuration. The PBX has the PSTN connectivity and all Cisco phones are DSC's in the PBX. I recently had to change the T1's configuration between the PBX and the Voice Gateways from QSIG...

Thanks to everyone on this one :o)

Bingo! I set MANO to YES in the RDB of the Paging Trunk and it got it working. What I don't get though is that on another site where I have the same setup, MANO is set to NO on the RDB of the Paging Trunk and it's working... Same chassis, Meridian 1 OP81, same PRI QSIG between the PBX and the...

It's working fine if I use a 500 set tied to the TAM B, the problem becomes how do you manage access restriction?? I don't want all users to be able to access the paging system...

The trunk is loopstart.

The CDP part works fine, I can call both analog or digital phones on the PBX from the Cisco side. It's just when dialing and ACOD on the PBX, from the Cisco, that I seem to loose the talkpath.

The trunk is OGT only and yes, both site use the same codec. I'm starting to wonder if it wouldn't be a missing patche (PBX) on the problematic site...

I'm trying to access a Paging Trunk on a Meridian 1 from an IP Phone on a Cisco Call Manager. Both systems are tied via a PRI. I have the same setup elsewhere and it works fine but on this particular site, I have no audio when accessing the Paging trunk... Here's a TRAC of both Paging TN's; Not...

That's the problem, I'm running Succession 4.5... There are plans to upgrade to 5.0 but I don't know when and I need to make this work. I need to have 911 set as an ESA DN because I use the 911 call info sent from a TTY to generate a calling card in my system... I guest my dog is dead until I...

We are using Release Link Trunks for our Centralize Attendant Service and since I'm not very familiar with this type of trunk, I'm not sure where to look to solve my problem... When a user dial "0" and ask a transfer to "911", the CAS operator can't transfer the call as he gets a "Fast Busy"...

So if I understand this, you want an Auto Attendant with an option for each departement of your Cie? Is your main number coming in on a DID route? If so, redirect it to your menu number ACDN (LD 49, IDC) and have 0 on your menu go the receptionist otherwise (if not a DID, maybe a COT) auto...

Thanks SL1M1, I'll try this out and let you know how it went :o) Maripaq