Recent content by mario82

I need to load a custom prompt into the PBX, a recording made in MP3 Format. Is there a way to load it?, or just play the recording next to the phone speaker? Thanks in advance

Hi all, i just want to be more specific on this for anyone trying to do the same thing. Implementation i did was using a CISCO WRV210 equipment and Fortinet 60B, as IPSEC is a standard protocol this should work with any other equipment no matter what brand you use. Both working with DSL and...

Ok i tried everthing but finally i had to roll back settings actully i use the default factory settings option and start over. That fixed it. Thanks all for your suggestions.

Hi I' using Unconditional Forwarding, and it's being easy i other systems, but in this one it has been a little bit complicated to implement it. on the other hand, o PGM 450-452 i don't see that field for "UPGRADE". I'm using PC ADMIN GSNAD-C.8Di 2009-03-30 Console software, and that PGM is...

Thanks doktor, Actually i have the most recent release here, i think is 3.8 for this PBX. Anyway i'll try to upload the *.usr file from another installation i had. Any other idea will be appreciated guys.

Thanks all for reply this post, but i never found a way to make it work this way, so i bought a VPN Client Firewall and i did it through IPSEC Tunneling. I think this is the best way..or at least the only one i know.

Hi IP AriaSOHO LG-Nortel System. I'm having problems to forward an extension to another one, when i do that, it request a password, i don't know why, i haven't set any type of security on extensions. What i'm thinking is that may be it has been activated from factory. Is there a default...

Well, i used DMZ pointing to my PBX but no luck, even i use DMZ on the LIP Phone side and still the same problem, can't get it working. I wonder if i need to use SIP instead H.323. Can some one provide a link or PDF guide to do this? I mean configure SIP on IP LDK Thanks in advanced

Ok, yes that would be my next step. Using DMZ, I just want to be sure that the way i'm trying is correct. I'll do it asap and let you know.

Sorry: 192.168.1.253 it's really this -> 192.168.2.152, my mistake.

Hi Doktor Thanks to you for reply...i have set this on my Router/Firewall already: Ports Type Forward to 1-65535 UDP 192.168.1.253 (PBX Internal IP) 1720,1503 TCP 192.168.1.254 (This is for H323) On the other side i have my Sniffer and i can see...

Hi All Masters here! I have a LG-Nortel IPLDK 60 console and i want to connect a VoIP Phone LIP-6012D trough internet. Office 1(Cancun): It has the LIP-6012D phone connected to internet trough a DSL Modem. Office 2: (Monterrey City): It has the IPLDK 60 PBX, at the Edge of the Network there...