Recent content by maraxman

Thanks, I'll try it next. But I'am afraid that my problem may be different, because in my case extension answers (hang-up) but you can hear nothing. maraxman T-Mobile Czech Republic

Hello, it happens on our Conversants (version 9), that all ports on particular Dialogic board are mute even if there is application running on the port. (on "sysmon" it can be seen). It helps switch-off IVR from power . Do you have the same experience? Is it way to find out this problem? Any...

Good question! I am interested in it too. maraxman T-Mobile Czech Republic

no idea? maraxman T-Mobile Czech Republic

You have to create two VLAN's. One for ip phones a second for a workstations. VLAN for ip phone has to be set as auxilliary vlan on Catalyst's port. So there will be two different ip addresses. This schema is good to define diferent QoS for different VLAN's. marax maraxman T-Mobile Czech...

when I'am using telnet to administrate definity, I use this key sekvences to "emulate" 513 terminal key Escape is ^[ CANCEL: ^[ Ow Enter: ^[ SB PGUP: ^[ [V PGDW: ^[ [U HELP: ^[ Om bye maraxman maraxman T-Mobile Czech Republic

change ethernet on G3VR10 and higher version maraxman maraxman T-Mobile Czech Republic

We have tried almost everything. X port does not work! only digital station with port assigned and telephone connected!! but this not really technical.

Hello, can you help me? I need some kind of virtual station (with no hardware assigments) to park calls here, and then pick up them back with CTI. We have contact centre from Genesys, and our Operators needs to make conference call for customers with external phones and then park it to keep...

Hello, can you help me? I need some kind of virtual station (with no hardware assigments) to park calls here, and then pick up them back with CTI. We have contact centre from Genesys, and our Operators needs to make conference call for customers with external phones and then park it to keep...

Hello, I strongly disagree. We have ccm for two years and we are diappointed. Recently Cisco has promised, that with new wesion 3.3.3, we soled our problems that we had previously. But face to fact that curently ccm (3.3.3.) is for two weeks in unstable (because of SQL), they are panic still...

>Our network guys are dead set on using Cisco because they >like the idea of having one vendor. This argument is their favorit. But are you using Cisco Network Adapter in your PC? No, and what about Cisco patch cords?? Important are the standards. I am administrating Call Manager with only...

I have to agree with BuckWeet. Too much has been said to this. Check the archive of this forum, there are many details mentioned. It is not really cost saving to throw away traditional PBx and start to build new system on cisco. My nightmare of the last days was upgrade from ccm version 3.2. to...

another idea Cisco cluster works only if active ccm totally fails (network fails). But this happened to me twice. ccm services works fine, but server for unknown reason was overloaded (server was uptime 22 days) Neither I could not connect from Terminal Services. This caused that you did not...

Sorry for misunderstanding. I did not mean that we had 40 ms latency, I meant that this latency is the maximal latency recommended by Cisco to have a servers in cluster. It was only limitation to do cluster over WAN (of course to have wide band line) maraxman T-Mobile CZ