Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

makuka's latest activity

  • makuka
    makuka replied to the thread SL 2100 sip trunk problem.
    Hey there CoralTech, that solution finally worked, and now the system is working normally Thank you so much for your support
  • makuka
    makuka replied to the thread SL 2100 sip trunk problem.
    ok settings on 10-58 done, now i'm going to reboot both systems
  • makuka
    makuka replied to the thread SL 2100 sip trunk problem.
    Hey there CoralTech, here are the settings in both systems: Building A 10-58 Area table from 1 to 8 IP Address: 0.0.0.0 and Subnet...
  • makuka
    makuka replied to the thread SL 2100 sip trunk problem.
    The gateway of the network is 192.168.5.1, and both switches are only gigabit poe, but no layer 2
  • makuka
    makuka replied to the thread SL 2100 sip trunk problem.
    Hi there CoralTech, thanks for the answer, here i will attach the ip config from the backup of both systems
    • SL 2100 Building A.png
    • SL 2100 Building B.png
  • makuka
    makuka replied to the thread SL 2100 sip trunk problem.
    Thanks for the reply, i will attach an image to make it easier, also here i will add some more info Both Sl 2100 are installed in the...
    • sl 2100 diagram.png
  • makuka
    makuka reacted to DoubleDriveLine's post in the thread SL 2100 sip trunk problem with Like Like.
    You haven't said where either of these systems is located. Are they in the same building on the same flat network? Are they in...
  • makuka
    makuka replied to the thread SL 2100 sip trunk problem.
    So in the second sl 2100 i should change the ip address on the second row? i ask because in the screenshot i see with two different...
  • makuka
    makuka replied to the thread SL 2100 sip trunk problem.
    Looking at the config via PCPro i see different ip address configured under Quick Install/Trunks/SIP Trunks/Profile/Interconnect IP...
    • 01 main sl 2100.png
    • 02 sl 2100.png
  • makuka
    makuka replied to the thread SL 2100 sip trunk problem.
    Thanks for the reply, I'm viewing the backup of both systems, on the main SL 2100 Looking via quick install Quick Install/Trunks/SIP...
  • makuka
    makuka reacted to OzzieGeorge's post in the thread SL 2100 sip trunk problem with Like Like.
    Hang on here, the OP hasn't said there are Sip trunk connections between the two systems or any other connection for that matter (other...
  • makuka
    makuka reacted to daddybadger's post in the thread SL 2100 sip trunk problem with Like Like.
    I connected SL1100 via SIP trunking, probably work for a 2100 - I have a document that you can follow its most likely f-route or...
  • makuka
    makuka replied to the thread SL 2100 sip trunk problem.
    Thanks for the reply, the sip trunk was working and after a power cut, it began with the problem, on Main sl 2100 i have the operator...
  • makuka
    Hi guys, noob on nec here... In this scenario there are 2 nec sl 2100 coneccted via lan and both have sip trunk license, but the...

Part and Inventory Search

Back
Top