Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Chriss Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Recent content by maksg
-
Link Flap Error on PC startup
Hi! From what you said, if cable is good, if TCP / IP stack is full, probably a problem on the switch port. Here in this link you can find out more .... http://www.cisco.com/en/US/docs/switches/lan/catalyst2950/software/release/12.1_6_ea2/configuration/guide/swgerror.html ok? I hope this... -
strange duplex behavier at sfp
Hi, See. Interface GigabitEthernet in SFP module can not configure the duplex until you use the "media-type". If you do not use this command, the interface will go down in half. Do this: Switch(config)# interface gigabitethernet0/2 Switch(config-if)# media-type sfp Switch(config-if)# duplex...
