Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations bkrike on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Recent content by Magpye

  1. Magpye

    CallPilot with IMAP Client

    I'm currently doing the same thing with both Outlook and Thunderbird, and having no trouble. It may depend on how many Desktop Licenses you have, as I believe each connection via IMAP or Web client uses a Desktop License. Good judgement comes from experience, which usually comes from bad...
  2. Magpye

    Forward ACD calls to an External DID

    Another option could be to replace the ACD number with a set which in turn is forwarded onto an ACD. Let's say the ACD is currently 4500. Out the ACD, and create a set with the DN of 4500 on. Add CFW, a touch of HTA, with some CFXA. Create a new ACD (4501) and add the agents to it. Then forward...
  3. Magpye

    Forward ACD calls to an External DID

    Another option could be to replace the ACD number with a set which in turn is forwarded onto an ACD. Let's say the ACD is currently 4500. Out the ACD, and create a set with the DN of 4500 on. Add CFW, a touch of HTA, with some CFXA. Create a new ACD (4501) and add the agents to it. Then forward...
  4. Magpye

    I need HELP for Voice Segment file creation in Application Builder.

    Just leave it empty. You may need to terminate the Begin block, but that's about the only change. Good judgement comes from experience, which usually comes from bad judgement..
  5. Magpye

    I need HELP for Voice Segment file creation in Application Builder.

    Here's a better explanation, which would have saved me a bit of typing.. http://www.tek-tips.com/viewthread.cfm?qid=1307517&page=1 Good judgement comes from experience, which usually comes from bad judgement..
  6. Magpye

    I need HELP for Voice Segment file creation in Application Builder.

    As they say, it's easy when you know how. This also assumes that the route to CallPilot <-> Symposium has been created and acquired in the IVR ACD-DN, and that CallPilot has the SDN created for voice segments. Create or use an application, (let's say it's called SoundBites), then click on the...
  7. Magpye

    voice recording when sending to our fax

    Have you tried importing or recording a silent greeting ? CP will then play the greeting, and then start presenting the fax tones. Good judgement comes from experience, which usually comes from bad judgement..
  8. Magpye

    CallPilot Manager - web site...

    Have you tried using a different browser ? I believe Firefox is supported. Try that, and see if it's a problem with your browser or the web site. Good judgement comes from experience, which usually comes from bad judgement..
  9. Magpye

    Palm sync with Outlook 2000 calendar

    Go Start|Program Files | Palm Desktop | PIM conduit sync | Sync with Outlook If you don't have it, you may need to update your Palm Desktop and/or Hotsync. Good judgement comes from experience, which usually comes from bad judgement..
  10. Magpye

    Sync Question

    Um, you can run into getting duplicates on both the Palm and the PC, which requires a bit of tweaking, but once that's nailed down, it works pretty well. Depends on what program your friend is going to use for synching the Palm.. Good judgement comes from experience, which usually comes from...
  11. Magpye

    Ugly Cover Sheet on Outgoing Faxes

    I'd check in the Mailbox Class and check the settings in Desktop and Web Messaging Configuration | Company cover page folder. Could well be picking up the cover page from there.. Good judgement comes from experience, which usually comes from bad judgement..
  12. Magpye

    Outbound Answered ?

    You could do a Call by Call report for each hour of the day. Fiddly, but it'll tell you the duration someone was on an outbound call for. Whether that was to voicemail or a person, the report can't determine. If you're wanting to expand the time for reporting, and possibly filter out some of...
  13. Magpye

    IVR noob question

    Yep, you can have that all in one script. /* CDN 8855 */ GIVE RINGBACK WAIT 2 GIVE IVR XXXX WITH TREATMENT XXXX WAIT 2 QUEUE TO SKILLSET XXXX In the second option of the MM box, put in the first CDN -8855 in this example. When Symposium hands the call to MM, it keeps an eye out for that...
  14. Magpye

    IVR noob question

    Sounds like you've got the gist of it. Setup your MM mailbox with the two options, with option 1 being your transfer number and option 2 the hunt group number. Symposium will keep tabs on the call, and will capture the call again when MM hands it back. Good judgement comes from experience...
  15. Magpye

    trying to use razr v3 as modem

    Set it up as a Custom connection, Connect to Phone Via Bluetooth Device v3 Model Razr Speed: 57,600 That should work for you Good judgement comes from experience, which usually comes from bad judgement..

Part and Inventory Search

Back
Top