Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Rhinorhino on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Recent content by madwok

  1. madwok

    Avaya Aura - CM and J100 Wireless Module

    Yes, we have it on CM8.3 . It works with SIP phone J159 with J100 wireless module .
  2. madwok

    how to backup cisco sg500-52p switch

    txt is preferred
  3. madwok

    Spectralink 8440 Implementation

    Hi, Google for this doc, which will help you on CS1K. Application Notes for Configuring Spectralink 84-Series SIP Telephone Version 4.7.0 with Avaya Communication Server 1000 Release 7.6 - Issue 1.0 -- Sample TN On phones a must: UXTY SIPL MCCL Yes (always)...
  4. madwok

    Avaya training - WTH?

    Totally agree on the Avaya's bs certification. I had more bang for my hard earned $ for having the demo kit and beat it to h8ll after I passed my free Avaya sale certification. For certs, I got more $ for being C*sco certified than Avaya . Granted, all of them certs are game but at least with...
  5. madwok

    How to disable PC port on avaya 1608 Voip Phone

    Why ?
  6. madwok

    D100 issues registering to IPO

    Did you update the D100 firmware ?
  7. madwok

    H323 Trunk between IPO & BCM450

    I had better luck in setting with SIP trunk between IPO and BCM.
  8. madwok

    I have an interesting dilemma. Prop

    I had similar setup in one of our maintenance shop . End up sacrifying one VOIP phone and use its speaker wire connected to a self amp horn . Paging works ok , even thru the wireless bridge . We did this on a 1616 phone as well as on a Nortel 1220 SIP .
  9. madwok

    Extension Inventory

    Been there, in you shoes , myself ! Best is to do get the manual and start figure thing out, if you can not find a local vendor (?) . Just to be careful and take note BEFORE making any change !!! . Norstar is fun to learn . Rad and NRU are nice but you can also program the N* from the handset...
  10. madwok

    basic programming of auto attendant main greetng and flexible keys with avaya ip 500 with 1416 ph

    Hi, Do you have a separated PC for your VM ( VM pro ) or your VM is in a chip ( VM Essential ) ? IPO comes with different type of voice mail.
  11. madwok

    SIP Setup Question

    cg11, Thank you for sharing your Level3 experiences here with all of us, specially under SCN consideration. I love this board !
  12. madwok

    SIP Trunk with VCM Card

    Check on your IPO system status, under resources and see on available VCM's . I think if you have a combo card, each will come with 10 VCM chan.
  13. madwok

    Park & Page on D100

    What we did is to provide 2 button . One for park on D100 where user has to enter the zone ( blame that on Avaya kludge ), On he page , we just use a short code and program it on another button . Note that all the button progamming is done on the handset as doing thru the IPO manager is not...
  14. madwok

    SIP Trunk with VCM Card

    Hi, SIP trunk would need license. VCM only provides VOIP resources. Thanks,
  15. madwok

    CISCO SWITCH WS-C3560G-24PS-S FAILS TO BOOT

    My gut said that the power supply is shot.
See more

Part and Inventory Search

Back
Top