Recent content by madnessxx

Old Problem: Depending on your OS if you pull up the start menu and if it says log off... Then you are not loged in as someone. You need a user name to be part of the &quot;everyone&quot; group and if it says log off... then you have have <null> username. If it doesnt say logoff (username)...

Old problem: On each side of the VPN's do you have more than one computer? Can the two computers on side A map drives? and the other two on side B map drives? If you only have one computer on each side of the VPN then you should check that you are logged in as someone. IN the start menu if...

wmckennedy: Current config Remote secure group 10.3.141.0 Subnet mask 255.255.255.128 Tracing route to 10.3.141.240 over a maximum of 30 hops 10.3.141.240 does not belong to 10.3.141.0/23 net it belongs to 10.3.141.128/23 network. Your router doesnt have a route that...

wmckenney: When you get the TTL expired in transit (caused by a routing loop) what does the trace look like? before the 120 some loops? When I tracefrom NetA to NetB it shows up as only one hop. Also why a 25bit mask? Surely you dont need the 65thousand extra networks? Not that it is a...

I had no problem with my 2 VPN box config. The two things I notice that are diffrent between mine and yours are: 1) I didnt set the lifetime=0 I did increase it X10 to 36000 vs 3600. 2) I don't have a Static IP on the one end so I have it setup on Network A to accept connections from a network...

TimothyCox: Where did you get this 1.40.2 firmware? http://www.linksys.com/download/firmware.asp?fwid=158 shows the latest as 1.39.64 I hit their FTPsite and found a file befvp41.zip in their beta directory but the zip has a password. /pub/network has the befvp41-fw13964.zip Also are there...

Still have not had the time to look at this windows -> linksys vpn but I was working with linksys on a problem where the DCHP address wasn't renewing after so many hours(yeah I know what does this have to do with VPN ... getting there) Linksys told me that my problem was that I didnt have the...

Yes, other wise you would have paid double for exactly the same feature set of the BEFSR41. That is the whole point of the BEFVP41 to be the endpoint of up to 70 tunnels. Im not trying to flame here just point out that alot of you are missing the point. This is the exact info linksys gave...

NO the linksys BEFVP41 IS the vpn endpoint. And you wont use the create VPN connection wizard to connect to it (that is PPTP and L2PT. That won't obviously work since at NO time durring the linksys side of the setup are you asked for a username and password. I am going to be playing around...