Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations derfloh on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Recent content by macpoint
-
Connected but can't browse
So your saying 1000/full is hard-coded in the asa5510 firewall. if yes Can you tell how can i do this...auto-negotiate ? Don't want make any mistakes. Thanks again for taking your time out and helping me. -
Connected but can't browse
@unclerico "2) i see your inside interface is hard coded to 1000/Full, is the switch that it is connected to also set to 1000/Full?? check the port statistics on inside interface, outside interface, the downlevel switch, and the router serial interface to see if there any errors. if you're... -
Connected but can't browse
let me try this...big thanks..i know it was alot of writing -
Connected but can't browse
sorry let me explain agian: we only have one ASA5510 and reason of the switch some people who rent space don't want use our router and firewall so they connect their own router to our switch .... So we have 1. T1 BOX 2. 3COM SWITCH 3. ASA5510 4. CISCO 1841 5. DELL SWITCH T1 box(proivded... -
Connected but can't browse
Let me give you better overview network topology: Before: T1-Netgear switch(which was only 10/100)-asa5510(coonected with cisco1841)-asa5510-Dell switch-- Now (since friday 5/14/2010): T1-3com 2928(which is 10/100/1000)-asa5510(coonected with cisco1841)-asa5510-Dell switch-- -
Connected but can't browse
okay with : ASA(config)# policy-map global_policy ASA(config-pmap)# class inspection_default ASA(config-pmap-class)# inspect icmp i am able to ping now but still no tracert..pls help... Only able to do 1 hop..after everything time out. -
Connected but can't browse
2. Yes, but it's netgear switch(10/100)..and i am going to change to 3Com 2928(10/100/1000) thanks again... -
Connected but can't browse
unclerico thanks, 1. Can you please give me the entry's how to do this default or ACL...which is better default or adding ACL 2. 1000/full how do check it in the switch ..do you want me to post switch configs... thanks for the much needed information...pls help me with this -
Connected but can't browse
sorry...here we go: You're going to need to give more info than that...let's start of with the configs of the router and the firewall.- --already posted firewall configs, trying to get you router configs.... Are there vlans in the switches at all? ---i think no. When did this start... -
Connected but can't browse
Yes, but this connection in and out are happening from quit while now.... Like i said i can't ping or tracert on any site... Also can enabling ping or tracert can be security risk? Firewall ASA5510 configs: ASA Version 8.0(4) ! hostname AP domain-name ls.net enable password encrypted... -
Connected but can't browse
Hello everyone, Need your suggestion..problem is some of our office computer does show connected with net but sometimes they are not able browse from any browser. Sometimes 1st one or 2nd tab works after that internet starts to slow down...slow loading of pages..or no loading at all...
