Recent content by mabsar

It worked. Thanks a lot

Thnaks KiwiOz07, I will try it tomorrow and will let you know. I just checked NTP and by default PDT is set to NO. So, I guess, your post will certainly solve the problem.

I think it has, but how can I verify?

I have already tried to log in using ADMIN2 password but did not see the Call Server option.

Hi, As per NTP, Call Server PEPs can be loaded using EM and this is done in System>Software>Call Serevr. But for some reason I dont see Call Server option under Software, there are File Upload, IP Phone Firmware.. etc but not Call Server. This is CS 1000E, Rls 5.5 PBX. Any help???

mjdave, You are right, correct domain name setting in cisco call manager has solved the porblem. mjclothier, i found that on google and document is quite helpful. thank you guys.

mjdave, Have you resolved this issue? any tips for the solution of this problem? as I am having same issue. I have CS1K Rls 5.0 and Csico CM 6.0 in our lab and trying to connect them over SIP but having one way call problem. I can call from Csico to CS1K but not from CS1K to Cisco. Thanks mabsar

Hi all, How global update of OTM2.2 can be used to change the CFW keys on M2616 sets? I have to change the maximum Call Forward digits from 8 to 11. The CFW Key # is 10. Thanks

strmwalker...callpilot agents have same nocs and tgar values as my test phone. Can you compare CPTrace messages of your callpilot (if you had saved some where) with mine when you had ncos or RPL problem? It seems that there is some thing else other then RPL or NCOS issue. Anyway all suggestions...

Does ncos effect even local dialing within the PABX?? To make the things simple, I am trying to dial local SDN 2195 from local user 2159, in other words I am not dialing any number outside the PABX. SDN 2195 can receive faxes from outside world. This is the problem I am not able to send fax even...

I have IPE 201i plateform. After your post I rechecked the dialing restrictions and RPL both on switch and CallPilot but these settings looks ok... no restriction.

I tried to send a fax which is local to callpilot...i-e 2195 which is a SDN for fax. I have also turned on remote notification which is working even for long distance calls...

I have Callpilot 4.0 insttaled and I can not send out faxes using callpilot. There is no issue with incoming faxes. This is not my first installation but some how I am running out of ideas to solve this problem. CPTrace has given following messages: 16:58:54:124 - CallPilot 4.04.04.12...

I agree with john poole's comments on Nortel support these days ... Thanks to out sourcing to India and now soon Mexico and Turkey will have Nortel centers for global support... Any way as per Nortel product bulletin for Rls 4.5, Meridian Mail Rls 12.12 and 13.14 are supported. Even in Rls 5...

Since I dont have QSIGGF package thats why I have configured IFC=S100 for my 81c Rls 3 system and it is working fine.