Recent content by m4526

Put your cd and reboot the computer and just read screen.

Please read This Do not listen to the other posting turn off the Power take the cover of the computer look at the back of the hard drive you will see a gray cable with a red strip it gose to pin one.check the Jumper on the back of the drive make sure that is set to master Put cover back on...

Fdisk the format the Drive 2 times start of with a new master boot record and install window

how to fine if you have a usb which is not working pug it in and install reboot into windows shutdown wait for five minies boot it up still not working pull out the usb cable and put back in and if it works usb still not working check Device Manager Device Manager can give a report saying...

use winmx you will get a full version

I think you are talking about win log box with (ie programe name.exe) if that is the problem You have some old sofware or bugs on your system bad hard disk with bad tracks you have mbr go out and get a ext hard drive backup your system and format try rebooting system

Go to Your BIOS set Printer port to Lpt1 use EEP Ver1.7 Ltp settings ltp1 378 2 278 3 3bc before you do this go to start menu go setting next look for priner window high light the printer click on it go into properties look for a tab called ports make sure that Ltps is tick make sure...

use windows98 bootup disk Type A:fdisk press y press 4 to view partition press 3 Delete Primary dos partition press Esc press 1 to make a new partition Get out of fdisk reboot the computer with a boot disk next step use oformat or format A:oformat C: do it 2 times If this dose not work change...

red to pin 1 remove floppy disk change bootup setup D: C: A: install using cd change the setting back to A: C: D: untill you get it fix get a file called mscdex.exe copy it to the path off C:it might be a cable problem

what format C:/s all it dose is bakup system file to format a computer right fdisk next format to get the hard disk need to use a windows 98 bootup disk type A:fisk read sceen press 4 to view disk press3 read screen

set the cdwriter to slave moving the jumpers on the back

Do you know that you can move the box round when you are install to see your hardware. (You can only click on the frist box)

go to hp website just download nt driver toolbox will work on some computers in win2000pro the software dose not work right

we are running cd rom 52 speed TDK Rewriter use a 40 pin harddrive cable

you cables will be ok pci card frist time when you install them night have problems we are running usb2&1 ports are working ok If the Pci card dose not work frist time restall it