Recent content by m3the01

Hello, I have cisco 5510 with a horrible service provider, they use nt servers for providing static ips. Basically u have a couple static ips but they need to be assigned through dhcp. So i set the asa to grab the address, everything works great for a few days sometimes weeks. Then...

Thanks a lot i will post the updated scrubbed config files, Please let me know if anything looks out of place or should concern me. Everything in terms of VPN and inside->outside traffic seems to be working. VPN-clients can only hit the sql server, which is desired.

I second that i cant get pings to go through, but i dont even have internet coming through yet...

I have also tried to use the same pool id and a route outside metric of 1, global (OUTSIDE) 200 interface nat (inside) 0 access-list inside_nat0_outbound nat (inside) 0 access-list LAN1_nat0_inbound outside nat (inside) 200 0.0.0.0 0.0.0.0 route OUTSIDE 0.0.0.0 0.0.0.0 xxx.179.192.1 1 The...

For the life of me i can get any client workstations on the internet. Here is the config file, Result of the command: "show running-config" : Saved : ASA Version 7.0(7) ! ... policy-map global_policy class inspection_default inspect dns maximum-length 512 inspect ftp inspect h323...

So been out of the game for nearly 8 years, primarily a programmer now. Trying to help a buddies company out configuring a ASA 5510, What im trying to do, 1)internet pass through, pretty sure i did this with NAT before. They have one static-ip that ive configured. 2)DNS functionality, ie) if...

I have two of these units the autonomous one has been working great. I had no choice but to pickup a lightweight version for the second one cause the supplier said they needed two weeks to bring the other version in, but i need it up and running by monday. So i need to downgrade this bad boy...

I just want to say i really appreciate the help and the forum is great. Quick background, -Client is running a SQL database that clients outside the WAN need access through. The clients are using broadband cards on Motion LE1700 tablet PC's. -There is a dedicated production SQL server, either...

Please note Users should never be working on a DC in terms of app or fileserver needs. DC should only be used for its specific tasks, ie DNS, DHCP, active directory and the other norms. Eventually once your org grows this will be the first thing to change.

Im looking for a disk array which is works well with IBM rs/6000 box running AIX. Also needs to be able to work well with nt box's. Any hardware suggestions would be great. Im currently having to wait for callbacks from company's. Damn. Funny me the client waiting to buy something. thanks

Sorry what are you trying to say, if its configured for a /24 mask it wont accept an address inside outside that range. The best i can make out is your saying is if the inside interface is configured for a /24 subnet then it will not accept any /22 subnets in its access lists. I tested this...

I am currently in the process of converting to from a 255.255.255.0 subnet of 254 hosts to a 255.255.252.0 subnet of 1022 hosts. On a pix config, is it smart enough to take a say a telnet 192.12.20.0 255.255.252.0 inside In theory it should see all address's from 192.12.20.1-192.12.23.254...

Yeah tried the cable swap but nothing. As for the port settings, its on full duplex and 100megabits/second. Steven

Heres the situation. We have 5 static ips and everything runs wonderful if we have the configuration as follows. ISP->Cisco microswitch 1548->PIX 515 everything is great, wonderful. Here comes the problem the microswitch 1548 is dieing. It Needs a power cycle every 10-14 days and sometimes...

I need a router that is capable of translation between two logical subnets on the same network. I need to configure eth0 with a 192.19.18.X on 255.255.255.0 and eth1 192.19.20.x on 255.255.252.0. I understand that routers are infact logical translator but just wanted to verify the 1841 is...