Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Chriss Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Recent content by m1227

  1. m1227

    BS450's MLT connect to ethernet channel

    Hi all, Anyone tried BS450's standard MLT connect to Cisco 4506's Ethernet channel ? Is it work ? Regards. M1227
  2. m1227

    MLT problem on 5510 and 450

    More information: BS5510 using SW:v4.2.1.004 BS450 using SW:v4.4.0.6
  3. m1227

    MLT problem on 5510 and 450

    Hi all, Here is the story and make it simple. I had a Nortel networks with couples of 450-24Ts (Named as A450 and B450) and 5510-48T (Named as A5510) in single VLAN1. Connection as below: A5510 ==(2 x 100M MLT)==> A450 ==(2 x 100M MLT) ==> B450 Workstation 1 (WS1) connected to A5510. Server 1...
  4. m1227

    Technical advice

    Hi all, Previously, I am working in Nortel site. Start from coming year, we are planning to use Cisco product. For core, we would like to purchase 2 x 4506. By design the 2 x cores will be linked with 4 x 1G ?. Hereby, what is the methods to link that 2 x 4506. LACP (IEEE 802.3ad) on layer 2...
    • m1227
    • Thread
    • Replies: 1
    • Forum: Cisco
  5. m1227

    Cannot Connect To Console On Nortel baystack 450 24t

    You see the Power On Seft Test screen ?
  6. m1227

    Version 5 for Ethernet Routing switch 5510,5520,5530

    Hi all, Anyone tried Ethernet Routing switch 5510,5520,5530 software release version 5.0. It's now support VRRP and OSPF like a Passport 8600. I can make use of two switches as a core in cheaper way. Any comments ?
  7. m1227

    450-24T firmware v3.1.1

    I had both BS350 and BS450. M1227
  8. m1227

    Baystack 8600, 450, Going between VLANS and small subnet

    Try to add static route at 8600. Example: Dest X.X.62.64 Subnet 255.255.255.192 Next Hop X.X.62.126 Dest X.X.62.128 Subnet 255.255.255.192 Next Hop X.X.62.190 Dest X.X.62.192 Subnet 255.255.255.192 Next Hop X.X.62.254 450 is layer 2 device, do not need to cater.
  9. m1227

    Nortel network equipment up time

    Follow up status: The counter is reset after reached 2 ^ 32 limitation. The switch is still function only the uptime start up again from 0 day 0 hours 0 mins. P.S: MID ID = 1.3.6.1.4.1.2272.1.1.10.0
  10. m1227

    How to get IP of baystack 350 T24 just now the MAC

    IP address for network switch mainly for network management. Use a RS-232 connect to the console port at BS350-24T is only way to assign IP address.
  11. m1227

    Nortel network equipment up time

    Hi all, Can I know how long is your Nortel equipment up-time ? When I using SNMP to collect my Passport 1200 status, the up-time has already passed 488 days. Together with the status, a counter is called "timeticks", it showed 4,217,664,900. With calculation, 4,217,664,900 / 60 / 60 / 24 *...
  12. m1227

    ARP table live time on 6509

    Thanks ~
  13. m1227

    ARP table live time on 6509

    Hi all, What is the default live time for ARP tables on Cisco 6509 with Supervisor engine 720 ? Thanks in advance.
    • m1227
    • Thread
    • Replies: 2
    • Forum: Cisco
  14. m1227

    Not able to ping devices on same vlan within a Passport 8600

    Can you show the 8600's routing table in here ? I also like to know the IP address of 8600. Thank you ! M1227
  15. m1227

    Cisco 6509 vs Nortel 8610

    Thanks Biv343, yes Nortel dones't had much EOL announcements as I saw. anthonyanderberg, your comments is a nice information for me. Cheer ! M1227
See more

Part and Inventory Search

Back
Top