Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Chriss Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Recent content by luvarne

  1. luvarne

    Convert a station from digital to voip

    TDM uses SLMO-24 module, HFA uses STIM-4 module. Of course you can't see a digital line in an STMI-4 card, or an HFA line can't be seen in an SLMO-24 card. Therefore, you need to delete the TDM line and add a new HFA line using the same station no., or vice versa.
  2. luvarne

    SLC-24 DECT Base Station Max Fannout Distance

    Hi Moriendi, thanks for your reply. What type or size of cable is used to reach distances up to 2.4 km or 3.2 km? Where can I get this manual? I have the soft copy of the PBX manual (the html version) but can't find this info any where. Or maybe I just don't know where to look.
  3. luvarne

    SLC-24 DECT Base Station Max Fannout Distance

    What is the maximum distance that an SL-4 base station be connected to an SLC-24, in km?
  4. luvarne

    Is UNIFY HiPath 4000 V7 better than CISCO IPT?

    Our organization of 5000+ employee is considering changing the PABX system from UNIFY HiPath 4000 V7 to CISCO IPT. I'm convinced that UNIFY offers better features than CISCO. How can I convince my management that I am correct? Any feedback would be much appreciated!
  5. luvarne

    Recording Voice Calls for HFA Lines

    How can we record voice calls in HFA lines? What applications or hardware to use? Area there freeware available for download?
  6. luvarne

    Enable forwarding only if destination is Active. Disable forwarding if destination is UNACH.

    Hi. How can we enable forwarding to an active destination, but disable forwarding automatically if the destination is inactive (unach)? I'm using comwin on HiPath 4000 V7.
  7. luvarne

    Forward if an extension is UNACH

    Thanks, I got it!
  8. luvarne

    Forward if an extension is UNACH

    Can you please provide more details? Thanks! :-)
  9. luvarne

    Forward if an extension is UNACH

    How can we automatically forward an extension that goes UNACH (inaccessible) due to faulty line or unexpected disconnection.
  10. luvarne

    Refta and clearing Errors

    Clear the error with this --> CHA-REFTA:CIRCUIT,1-1-25-0,,,,0; where 1-1-25-0 is the PEN for the T1/E1
  11. luvarne

    Shortcut for Typing a Code

    Hi, in our PABX system (Unify OpenScape Hipath 4000 V7), we use a code (*4) to change/use the APIN1 of a number that has an access for external calls. Example: we dial *4 + 4444 (station with access to external calls, e.g. mobile) *4 + 4444 # PIN # then a dial tone is heard. Is there a way to...
  12. luvarne

    Incoming Calls

    Is there a way to get the list of incoming calls for a certain extension? Incoming - from local or from external
  13. luvarne

    Location of DECT handset by Base Station

    Anybody knows the command for locating the DECT handset to which base station is it connected? So far, I only know the DIS-SLCB:PPAC,DATA,LTU,SLOT,PORT; which only gives the SLC but not the base station (0 to 15) of that SLC. So frustrating...
  14. luvarne

    GPS or Locator for DECT Handsets

    Is there a command in HiPath that let's us manually know which base station is our DECT handset currently connected to?
  15. luvarne

    GPS or Locator for DECT Handsets

    Could it be the HiPath Positioning System?
See more

Part and Inventory Search

Back
Top