Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations derfloh on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Recent content by luisb001

  1. luisb001

    CallPilot Auto attendat problem

    Operator settings Attendant available NO check Business open check Answers lines check Attendant 237 (reception) reset operator pass NO check This my operator settings
  2. luisb001

    CallPilot Auto attendat problem

    I forgot to say, before, the lines were answering by the general delivery, I had to disable in system properties, removing the check mark in "Enable General Delivery", after that, I could hear the custom greeting of the auto attendant, but now, before I hear the message "user is not available
  3. luisb001

    CallPilot Auto attendat problem

    I have a bcm400, the CallPilot it first starts, I get build the auto attendant operator with the CCR tree, greeting table 1, and assigned to answer the lines and it works fine, the problem is always before the greeting of the auto attendant, a message that says "the user is not available" and...
  4. luisb001

    call pilot, auto attendant message

    I have a nortel bcm400, the call pilot is starting for the first time, I have to create an automatic operator message that has options, example: thank you for calling market, for sales, dial 2, for purchases, dial 3, for workshop, dial 4, does anyone I can help?
  5. luisb001

    Voice Mail to BCM400

    Thanks a lot for your time
  6. luisb001

    Voice Mail to BCM400

    I can install a Call Pilot 150 in the nortel BCM400? the same used for a mic´s Norstar?
  7. luisb001

    Voice Mail to BCM400

    I have a bcm400 with 32 stations and need to install a voice mail. What is the more advisable to use?
  8. luisb001

    I need a Delta server software for avaya ip403

    I need Delta server software for avaya ip403, office manager version 4.1(15), I have not installed the software, how and where I can download? Thanks a lot
  9. luisb001

    I need connect an avaya ip403 to a computer with calls reporter softwa

    I have not installed the Delta server, how and where I can download?
  10. luisb001

    I need connect an avaya ip403 to a computer with calls reporter softwa

    I need connect an avaya ip403 to a computer with calls reporter software, Do I need to schedule something in avaya? What is the correct port to connect to the computer?
  11. luisb001

    I lose the configuration in my Call Pilot 150

    Thank you all for your time, I will try with the supplier to replace the cartridge
  12. luisb001

    I lose the configuration in my Call Pilot 150

    I need change the cartridge software? or all system, call pilot?
  13. luisb001

    I lose the configuration in my Call Pilot 150

    I have problems with my voice mail, leave twice that to erase all the information and put the voice mail to the factory settings, I reconfigure everything, but do not understand why this happens?, Also want to help make a backup and not have to reconfigure everything again, if lose data again
  14. luisb001

    UPGARDE A SECOND 6 PORTS EXPANSION FIBER CARD XC 7.0

    Thank you very much for their valuable help and time.
  15. luisb001

    UPGARDE A SECOND 6 PORTS EXPANSION FIBER CARD XC 7.0

    I'm looking for mics xc 7.1 Software with nvram, and find one, that says mics xc 7.1 upgrade kit tools, what is the difference between the two? thanks a lot
See more

Part and Inventory Search

Back
Top