Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Chriss Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Recent content by Ludit

  1. Ludit

    Only can do 2 outgoing calls with 3 POTS

    @TouchToneTommy, yep. Made sure the lines are set to bothway for each of the pot lines. @Okkie26, I did notice that when calling out on the third time I hear 5 quick beeps. The display doesn't show anything except the number I'm call out to but based on the system monitor data the the beeping...
  2. Ludit

    Only can do 2 outgoing calls with 3 POTS

    Hi @Telecomboy, I checked each of the lines and it's set to automatic. @Okkie26, Nah, it's tested and not the same POT every time. Im going to get grab the monitor data this week and see whats up. If you have any other suggestions let me know, I'll post the data and the solution if I find in...
  3. Ludit

    Only can do 2 outgoing calls with 3 POTS

    Hey Okkie26, Yep, both is set to 0 for both incoming and outgoing.
  4. Ludit

    Only can do 2 outgoing calls with 3 POTS

    Hi Okkie26, thanks for the quick reply. The ARS has only one line group ID of 0 and all the line pots line for incoming and outgoing are also 0.
  5. Ludit

    Only can do 2 outgoing calls with 3 POTS

    Hi, I have Avaya IP500 V2 with 3 POT line setup. Can call from outside and use all three lines. But cannot call outside using the third line, after dialing it makes an beeping noise (not busy signal). Looked at the incoming call route, systems and hunt group and I don't see anything unusual...
  6. Ludit

    Separate POTS line for different users

    Hmmm... Calling in is working great but does this also works with calling out when other people sees the caller id? I set the outgoing ID to a different number for each group but I'm still pulling numbers from both groups.
  7. Ludit

    Separate POTS line for different users

    Set the first set of incoming numbers to incoming ID of 1. Same applies to the second set of numbers to 2 and have the outgoing ID same as 0 due to the ARS default of 0. I would then point the incoming numbers to their respective hundt groups. Sound like a plan! Thanks
  8. Ludit

    Separate POTS line for different users

    For example, if I have 4 POTS line and group A need to use 1111/2222 and and user group B 3333/4444. Would it be the best way to have each user to have their own Hunt Group and have the first set of numbers of incoming route set to hunt group A and the second set of numbers set to hunt group B...
  9. Ludit

    Waiting for Line

    Oh, thanks!
  10. Ludit

    Waiting for Line

    I'm not sure where can I change this settings but I'll try to explain to my best abilities. I have 2 POTS line. Calling in and out works but sometimes user will encounter waiting for line. So for example, user dials a number but decides to hang up and re dial, the phone will says "waiting for...
  11. Ludit

    no application firmware

    Wow, it works! Thanks :)
  12. Ludit

    no application firmware

    I'm trying hook up a digital phone 1416 and getting a no application firmware / Flash memory failure. Did some googling and found that I should try upgrade to the latest firmware. The current firmware is 9, the latest I see here under the File->Advanced->Upgrade is 9.1 Is this a necessary...
  13. Ludit

    Creating a incoming line for private?

    sizbut@ thanks for clarification! IPGuru@ OMG, I was just trying to set that one up that other day on 3 POT lines but gave up since it requires additional changes and didn't want to complicate the current setup.
  14. Ludit

    Creating a incoming line for private?

    Thanks, sizbut, I will report back soon. @IPGuru I never thought twice regarding to the line appearance since the phones comes with them as default. I'm now a bit curious, can you link to me to where I can read more information about the unnecessary evil line appearance? Or a simple explanation...
  15. Ludit

    Creating a incoming line for private?

    Hi, The user has 4 POTS line and 1 of them is a private line. User phone currently has 3 line appearance so I'm going to add one more, ie A B C D. At the trunk lines config, the private number is on the first trunk with line appearance id of 701. I then create label and add line appearance D on...
See more

Part and Inventory Search

Back
Top