Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Recent content by lsicforum
-
iSight und PIX515 with
Hi yizhar, "You will probably also need a "static" command to map an unused registered public ip address to the internal machine" Why? As you have understood we use NAT. I think it is enough for the connection. Of cause i can try what you meane. But what is if we could have...- lsicforum
- Post #3
- Forum: Security, hacker detection & forensics
-
iSight und PIX515 with
Hello, I am trying to connect two firewire cameras iSight at Apple G4s. One Apple computer is in Germany behind the Firewall second is in Amerika. The connection works if I use the germany's computer outside the firewall. So the problem is in the pix. I red on the Apple site, that follow ports...- lsicforum
- Thread
- Replies: 3
- Forum: Security, hacker detection & forensics
-
Traffic for every IP-Adress
hawk, thank you! I will try it.- lsicforum
- Post #5
- Forum: Security, hacker detection & forensics
-
Traffic for every IP-Adress
haknwak, Thank you! I hoped pix can show this info oneself, but it doesn't seem to be so. OK, I installed KiWiSysLog. What I need now the logging level right to set up. Does anybody know what logging level I need for the traffic info?- lsicforum
- Post #3
- Forum: Security, hacker detection & forensics
-
Traffic for every IP-Adress
Hello all, We have PIX515 (Software 6.1(3)) with one inside und one outside interfaces. We use NAT. That is our inside network 192.168.0.0 (255.255.255.0) uses one outside ip-adress for example 200.100.100.150. so i have follow question: is it possible to show or to control how much traffic...- lsicforum
- Thread
- Replies: 5
- Forum: Security, hacker detection & forensics
