Recent content by LOSEGONET

Programing the Pool key first then using it to program the external dial key worked. The new key now works exactly as the old one but with different dialed digits.:) John Losego LOSEGO.NET

Those are both good suggestions. After my first few attempts at programming the key failed I became a deer in headlights... John Losego LOSEGO.NET

I have a client with a MICS 2.0 and a key that the button inquery shows "Line Pool B... 1#**" This is used to access a third party door strike controller (on Line 4 - Pool B)then dials 1#**. I have installed a second door strike and need to program a seperate key to dial 2#**. When I program...

We are using a new Trisys product called Replay to record all conversations over the PRI. The Replay box has a passive tap to the PRI and uses the D channel information to store the channel number in the reording name as a wav file. The SMDR output from the phone system (MICS 7.0) is then used...

I have a customer with a CP150 2.1 that uses Outbound notification with their cell phone. The complaint is multi-part. Part 1 - numerous voice mail messages are left on the cell phone's voicemail stating that "You have new CP messages..." Part 2 - Messages from the CP are left in the user's...

Thanks for all your help. The customer 'found' some documentation from AVT regarding this Nortel integration for the Call Express and forwarded it to me. It's in PDF and completely explains all - you can check out the file here - Nortel Norstar NTDIU Digital Set Integration...

There are no external VMI units, but there is an unknown card in the PC that is the Call Express that the digital ports go into first then out to the dialogic card. Also this unknown card has an RS232 connection to the serial port of the PC. My thought is that perhaps that card is the VMI unit...

I have a customer with a MICS 2.0 and a third party voicemail (Call Express). They are using digital station ports for access to the Call Express. To transfer a caller directly to voicemail they use FEATURE 990. Once this code is entered the display shows [ENTER MB] and the display keys read...

pturner1 and sprucegrover: I agree with each of you. The best solution is a second line in a rotary hunt with the main number. This question arose from just such a situation. A residence with a single main residential line - they don't want the recurring expense of a second line. They just...

The support I meant was on the telco side. If the telco line subscribes to CLID and Call Waiting CLID (second call inbound to the same line) will CICS 6.1 be able to acknowledge this and pass the CID to the display? At this point the busy Norstar set hears the 'beep' and may executes a LINK...

Does CICS support Call waiting Caller ID? If so, at what software/hardware release? John Losego LOSEGO.NET

Xaqte, Did you want to program the night feature back onto a feature access key? While on-hook, press: [Feature][Redial][Button to be programed][Answer][Feature][80][Feature] Pressing the [Answer] key followed by [Hold],[Transfer],[Answer],[Speaker],[Redial],[Conf],[Recall], or[Feature]will...