Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations bkrike on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Recent content by lomex

  1. lomex

    Network two PCs

    Hub? Not needed. You only have 2 PCs and they will be less than 100 m apart, Cross cable is enough. The benefits with a hub 1. You can adjoin 3 or more pcs or ADLS routers to the net. 2. Hubs amplify signals using its internal repeater thus 1 PC can be located 100 m from hub, the other is 100...
  2. lomex

    Network Speed

    Check out if your switch is running 100Mbps at full duplex. Configure the 10/100 Mbps NIC fixed at 100 Mbps. You can use this using the NIC's configuration tool (normally comes with the NIC on a cd or floppy). This will problem shows when a 10/100 NIC is copnnected 10/100 hubs that could not...
  3. lomex

    Very Strange Problem!!!

    Some NIC's (even those of 3com)that are 10/100 do not run on a 10/100 hub. My remdey on this is that fix the NIC to 100 only then the hub can sense the NIC and will communicate through the 100.

Part and Inventory Search

Back
Top