Recent content by loevis

If it`s possible to access the system, then only load overlay 22. At the REQ-prompt, type inn the command ISS. The responce will be: VERSION 1411 Option 11E VERSION 2111 Option 11C VERSION 2121 Option 11C running 3.0-sw.

Hi, if this is an M1 Option 11/11C, the first thing you have to do is to define your PRI-loop. This is done in overlay 17: REQ CHG TYPE CEQU . . PRI2 X (where X is the same as the slot where the PRI-card is located) Then just hit your enter-button until you get u-data/p-data. You can...

Hi, you could try to visit "www.rad.com", look for some equipment called FOM E1/T1 (Fiber Optic Modem). Maybe you can find something to help you sort out your problem.

The type 3820 is nonexisting in LD 11, you have to use type 2616.

Hi, the call log will log all calls presented to the set. You can ofcourse turn the call log on/off, and when turned on, you have the choice to log all calls, or just unanswered calls. You use "call log options" in the sets menu to make this choice.

Hi, PLDN you will find in overlay 57, and the list for the stored numbers in overlay 18 (print in overlay 20). Hope this info can be to some help.

Hi, let me make up a situation. User Bill (in USA) lives near to the place where he works, and he has a sister i Japan. Before he goes home, he forwards his work phone to his sister i Japan. Then, when he comes home, he makes a call to his work number, which is a local call. His workphone...

In CDB you will fint INT_DATA (Intercept treatments), and here you will find CTVN (call to vacant numbers), and how these calls should be treated. It might look like this: CTVN: OVF OVF OVF ATN The first entry is for: station/DISA second : attendant ectended...

Try to log on to Nortel, follow these discriptions. 1. www.nortelnetworks.com 2. Under Research and Buy - select “Technical Documentation” 3. In the product list select - “Meridian 1 Options 51C, 61C, 81C” 4. On the search results - select “Meridian 1 Options 11C-81C Documentation...

I`m not quite sure what you mean, but it might be that you could use the NAS-feature in this case. And as you know, working with telephony solutions, there are no problems, just challenges.

I had the same problem some time ago, and it was a corruption in the switch. Probably you need to contact Nortel to clear this corruption.

Just do the following programming of your set. KEY 1 SCR XXXX KEY 2 SCR XXXX CLS OLD (OUTGOING LINE PREFERENCE DENIED) YOU CAN NOT HAVE THE DN ON KEY 0, BECAUSE THEN THE USER WILL GET THE DIALTONE WHEN GOING OFFHOOK. WITH THE DN`S FROM KEY 1 AND UPWARDS, THE USER WILL HAVE TO SELECT WHICH...

Some time ago I sent a question to Nortel regarding these messages, and the answer was something about background software diagnostics against Orion-sets. If these messages appears in large scale, the customer probably have problems using their phones, and you need to do some more...

After installing CallPilot (201i, 2.02), and logging in on CallPilot Manager, you will be told to change the login password. Then, when I put in the new password and click on the "save-button", the following message appears. Microsoft JScript runtime error '800a000d' Type mismatch...

I`ve had the same problem on one of our sites, and I sent a question to Nortel regarding this message. They were not able to tell me exactly the meaning of this message, so I was advised just to reprogamme the unit. In our case, reprogramming solved the problem, so maybe you should try to do...