Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Recent content by llyolf
-
Connecting 3660 router to 2948G L3 switch
you wiould add the same routes on the 3660 only pointing to the IP of the 2948 (the 2948 side of the /30). so say you have 10.1.1.0/30 (10.1.1.1 on the 3660 and 10.1.1.2 on the 2948). your route for the about will be ip route 10.1.96.0 255.255.255.0 10.1.1.2 the other thing you could do if... -
Configuring FastEtherchannel
You first may want to check this link out: http://www.cisco.com/warp/public/473/4.html#subsecondtwo I can tell you some tips. The 5505 is not as smart as other Catalyst switches since it is a bit older. It will only load balance based on the last 2 bits of the Destination & Source Mac... -
Connecting 3660 router to 2948G L3 switch
The other option to your doing this is keeping the config you have on the 2948G-L3 and adding a /30 (255.255.255.252) IP block between the 2948G-L3 and the 3660, basically creating a "routing link" from the 3660 and the 2948G-L3. This probably requires less work than moving the BVI's...
