Recent content by lfournier

Thank you so much for all of the valuable information. I have stopped freaking out and am now much calmer :). I will follow your advice and try this out tonight after hours. I will let you know how it goes. Is there some way I vote for you on here? I saw something about most valuable poster...

We did previously have site to site connections but they are gone now. I use it only for security and vpn clients. If you really think the router isn't performing any practical function then I guess I can take it out. If there is no remote routers then I wouldn't have to do any of the isakmp...

Thanks for the additional thoughts on this. I will have to read over your solutions and see if I can figure out what to do. As I said I am really a newbie in this area. I have posted my router config below. Would it help if you could see my pix config too? Let me know. You have been so...

Thanks so much for that. You were a great help!! Lou

Thanks so much for your help. I will give this a try. Louanne

I think I am in trouble then..grin. There is no money to buy new parts. So could I keep the pix, my router and their router if I change IP routes on both the pix and the 2621? I hate to bother you further with how to do this since you have been so helpful already but I am totally stumped...

Yes it does. Louanne

Ahh I know that would have been so easy. But I have the requirement to keep both our pix and our router. This is why it is all so confusing. Is there something I can change in the pix? I basically wanted the isp router to just be a kind of passthrough for the internet connection and...

Physically the topology is this: My Pix connects to My router, which then connects to the ISPs router. Going into the My router I have the T1 in the CSU/DSU and the ADSL in Fastethernet0/1. Is that what you were looking for? I am sure PAT is being done on the PIX. Thanks Louanne

Fastethernet0/0 connects to our lan. I will try putting in the next hop. Do I have to remove the serial entry for this to work? Also is there a way for me to test connectivity through the new router. I mean is there a way to test whether the new router is working without disconnecting the...

Thanks for your help. Below is posted my router config. I believe the NAT is being done on our PIx. Using 1063 out of 29688 bytes ! version 12.0 service timestamps debug uptime service timestamps log uptime service password-encryption ! hostname CanadaEdge ! ! ! ! ! ip subnet-zero no ip...

When I do a show ip route I see a number of configured routes. Nothing says default but at the bottom it says 0.0.0.0/0 is directly connected, fastethernet0/1. Thanks for your help. Louanne

Before I begin, please forgive me. I don't have much occassion to change anything on our router and am definately a newbie. I have a problem which I believe is fairly simple and yet I cannot get it to work. We currently have a Cisco 2621, with a T1 on our serial interface. We have recently...

It is a domain.

I have created a hidden($) mapped drive for my manager. When she changes her password she is unable to access this mapped drive unless she provides her old password. Can anyone tell me where to start with this one? Running Windows 2000 Server with SP3 Client is Windows xp Louanne...