Recent content by leeniep

New to the Siemens world! Eeek Where would I go to add an area code to the PBX? Leenie P [gorgeous]

[ponder]I am trying to Enable ODBC and JDBC on the CMS server. I have the Avaya document that shows how this is done but I am stuck on the part about modifying a couple of files on the CMS server. This is done at the unix level in CMS. Here is what the document says, can anyone tell me was...

I am looking for a company that can support our Octel voicemail system that we have at a site in California, the support company can be anywhere because they just need some programming done, can anyone recommend a company that still supports Octel voicemail systems? Thanks, Colleen Leenie P...

I need to change an item in my system-param features table. We have a S8700 running 2.2.2. I am looking to change the "create UCID" option on page 5 of the features to Y and change the "Send UCID to ASAI" option on page 12 to Y. Is this service affecting or can this be done during normal...

Hi, my company has an S8700 switch and has the paging setup using a paging trunk, each area has it own trunk access code. We would like to change this to have zone paging and an all call. We currently have to page through each paging trunk for each area seperately when we do an all call. Is...

I have an admin on a 6424 that has bridged appearance for 4 different people. 2 bridge appearances show the caller id display on her phone the other 2 don't. I have checked her station, the only difference between them is that the one that does not display caller ID is set to not ring. The...

I think the system is an Octel 100, but I'll verify. The problem with the MWL is that sometimes the light will come on when there are no messages and not come on when there are messages. This is happening to everyone at the site. Avaya has check the Prologix but found nothing wrong on that...

We have an Avaya Prologix system using an Octel 100 voicemail system in Fort Madison, Iowa. They are having trouble with the message indicator. Avaya has checked out the PBX but they do not support the Octel. Does anyone know of a vendor in or near Fort Madison that will work on an Octel 100...

My company would like to look at doing autodialing, not predictive dialing utilizing our Avaya S8700. This is for a VERY small group that currently manual dial out. Does anyone out there do autodialing through their Avaya switch and if so what/how are you doing it. Leenie P [gorgeous]

My company would like to look at doing autodialing, not predictive dialing utilizing our Avaya S8700. This is for a VERY small group that currently manual dial out. Does anyone out there do autodialing through their Avaya switch and if so what/how are you doing it. Leenie P [gorgeous]

While trying to change a coverage path for an extension today our s8700 would not allow the change giving an error that the extension had measured principals. We were able to locate the measured principal table but can't figure out what the table is for. Can anyone shed some light? Thanks is...

Reusser, You are a genius, it works, Thank you so much!!! Leenie P [gorgeous]

Reusser, I have configured the dumb terminal per the manual and still do not have connectivity, the cable coming from the 11C is a 25 pin male, when cabled before it was borrowed the connection had a female to female gender changer on it. I have connected cable labelled "0" to the dumb term...

Thanks for the info, I check out my manuals. Tek-tips does not allow the use of email addresses, the last time I used mine in a post the deleted my entire thread and sent me an email explaining that it was a no no. Leenie P [gorgeous]

Hi, the maintenance terminal that was hooked up to my Option 11C and Meridian Mail was used by other staff in my office on a Unix box. The result is that the settings were changed and now that I have it back on the system I can not communicate with the switch or voicemail. Does anyone know...