Recent content by leebyatt1

Is the cabling that supplies the building got any external overhead span?

I thought I would get a modem. But no just silence.

Im 100% Sure it is 599 on our system. If you dial 599 you get on display "Analogue Remote

No we had our engineer transfer the call to 599 and we were getting silence and we would evently drop out from my console with system error,

Never used one as I usually use ISDN based lines and just use a DDI. With A remote modem for analogue lines how do you dial in. Using default floating ext number and all biut keep getting system fault

The DPT phone will work by having the CO keys assigned. Where as the Dect will not have this. been a while since I done a KXTD but you need to program teh system and remove any CO lines which are not connected as the DECT will try to pickup the programmed CO weather their is a line or not.

Shall look into this. Thanks CWC3

Right, let me say for example that I have 2 analogue lines 01234 567891 line 1 comes in and this call forwards over line 2 to mobile 07123 456789. What can be done to stop the line lock up after the caller/called has hung up? Have tried with newest sw upgrade this week but still getting CO...

Well in short is their any way round Analogue CO-CO trunk lock ups?

Has any one sucesfully installed centrex style lines from an Analogue extension port off the TDA. It works but seems to lock up the lines.

Will have to see what happens with this then when the kit goes in. Am I also right that the 2410/2402 are not fully working with 2.1

Is the EU24 working with current sw or will this come with V3? Thanks

Sorry I mean to say DS!

Can I confirm a 2420 or indeed 24** is Digital Terminal. Cheers

Agreed but does happen!