Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Rhinorhino on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Recent content by Lectrician

  1. Lectrician

    Mobile Twinning - Remotely Turn On & Off

    Perfect. Thanks!
  2. Lectrician

    Mobile Twinning - Remotely Turn On & Off

    Thanks. This is what I thought I was trying to achieve in my first post. If I setup a DDI number which takes the mobiles CLI, that call routes to 00 which gives internal dial tone to allow access to system shortcodes to turn on/off twinning? Looking more in depth, it should target a shortcode...
  3. Lectrician

    Mobile Twinning - Remotely Turn On & Off

    That’s great. I’ll try this on a test system I have in the coming days. Thanks. Although they have a VM Pro licence, they don’t have it setup, they’re just using the built in essentials VM, so that’s another hurdle.
  4. Lectrician

    Mobile Twinning - Remotely Turn On & Off

    Yes. VM Pro is licensed. I’ve not used that too much other than for AA. I’m not near this particular system at the moment, but trying to prep myself before taking a look. The VM Pro license is showing on the config backup though. Thanks.
  5. Lectrician

    Mobile Twinning - Remotely Turn On & Off

    Hi. With the V11 IP Office 500, I believe Mobile Twinning is licence free? Assuming so, to turn on and off the twinning remotely, can I setup a users DDI number to route to their extension as normal, but also create a second call route with the users mobile number as the CLI number with a...
  6. Lectrician

    IP Office Phone Engaged

    Reserve Last CA was indeed ticked and was the problem. It is unticked as standard after resetting to defaults. I don't get too involved with IP Office too much, and to be honest, I never really understood the purpose of the Call Appearance Keys. They do make more sense to me now! I can add...
  7. Lectrician

    IP Office Phone Engaged

    Hi. Yes. As there’s only one system phone and two SLTs, with just a single line, I thought one appearance would be ok? This system has been resurrected temporarily to provide AA until a new system with SIP trunks is installed. I’ve defaulted and reprogrammed, all working, but would still like...
  8. Lectrician

    IP Office Phone Engaged

    The system isn't in use yet, and only has 3 extensions with a simple AA. I could re-program from scratch quite quickly, but would prefer to identify where it is failing. I don't like being beaten! By engaged, I mean if I pick up an extension and dial an extension number, I hear busy...
  9. Lectrician

    IP Office Phone Engaged

    They are not set to login as far as I know. If I try to use the *35* code to hot desk login, that is not working. How would I check the phone is logged in? Thanks.
  10. Lectrician

    IP Office Phone Engaged

    Hi, No. All phones are showing as DND OFF on phones.
  11. Lectrician

    IP Office Phone Engaged

    Hi. IP Office 500 V2. When I am calling from Ext 200 to 201 for example, 201 is engaged even when on hook. It doesn't ring. This is the same with all digital extensions. Analogues do ring, although no phones are plugged in to the analogue ports to confirm they actually do ring. With the...
  12. Lectrician

    Sl1100 - VRS Queue Announcement

    Thanks for your input, it is much appreciated. From tomorrow onwards, our online booking is live. We are going to have the AA answer with a message saying "to easily book a table, please visit our website" etc, and "if you don't have access to the internet, press 1 and a staff member will deal...
  13. Lectrician

    Sl1100 - VRS Queue Announcement

    I have today used the VE option. I forwarded the AA to the VE, and the MFT and one SLT (forwarded both ring) do ring. The trouble is call queuing. If my max calls on the DDI table is 4, some are listening to message, but some end up hitting the VE when it’s maxed out, as assume only 2 calls...
  14. Lectrician

    Sl1100 - VRS Queue Announcement

    Thanks. On the MFT, I have set a VE to ring and appear on a function button. (15-07 & 09). Do you mean to set call forward on the VE? So when the VE rings, it will ring the MFT and also forward to the SLT and that will ring? How would I forward the VE to ring two SLTs? Thanks!
  15. Lectrician

    Sl1100 - VRS Queue Announcement

    I think what I am trying to do is direct the incoming call to a ring group rather than a department group once they press "1" at the auto attendant. This is not permitted though? The other option a VE,but 2 of the phones in use are just SLT cordless phones, and so not able to ring with a VE...
See more

Part and Inventory Search

Back
Top