Recent content by leardininwc

Hi. I have a call pilot 150 behind a Norstar MICS6.1 . I log in remotely through port 8000 and a day later nobody can log in through a browser internally or from outside unless we reboot the call pilot. Help. Thank you. -mike

Thank you so much.

Hello everybody, Will a MCK6000 extender work with a MCK1000 remote unit?

Got it. Thank you so much.

When I go in the Element Manager/System/Keycodes for EXP PORTS I see 2 ACTIVE. I guess what I don't understand is if I connect a G8x16 will I still need licenses for 16 digital extensions?...or the fact that I have 2 ACTIVE EXP PORTS means I can connect a GATM8 or G8x16 or both without buying...

Thank you telcodog. So if the system has 2 ACTIVE EXPANSION PORTS and I go from GATM4 to GATM8 on the existing cabinet I can still add a second cabinet with a 8x16 module? That will give me 20-analog trunks and 28-stations since the main unit is 4x12? Am I correct?

I forgot to add it's a BCM50 system.

Hi guys, do I need any licenses when replacing a GATM4 with a GATM8? Will that give me 4 additional analog trunks? Reason I'm asking is that every supplier I call gives me different answers. Thank you in advance...

That was it....thanks for the reply.

I've connected two MICS systems via Norstar voip gateways. I get stutter dial tone from the other system and then have to dial the 6-digit cos password and the extension number in order to complete the call. Anybody knows a shorter way to get this accomplished? Thank you in advance.

Yep...that was it SWCA. Thank you guys.

This may be an easy question just never had to deal with it. The system is MICS6.1 with a Callpilot 100. When I do button inquiry on some phones I find buttons called "Call 1" and "Call 2". Anybody knows what they do?...or how they are programmed? The system has a PRI citcuit on it. Thanks in...

Yeah...so it's not possible what I want. This are lawyers and for some reason can't be asked to press too many buttons. They want the assistant to create a conference call let's say on extension 3400 (the assistant's extension) and then transfer the conference to the lawyer's extension 4302. The...

That will not work. Feature 70 or Transfer is used to disconnect yourself from the conference call. Thanks anyway

can a conference call created on one extension be transfered to another extension? System is MICS 6.1 with PRI lines thanks in advance