Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations derfloh on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Recent content by laytrotter

  1. laytrotter

    How do you check when Solaris was installed ?

    hi dandan123 Have a look in /var/sadm/system/logs
  2. laytrotter

    Sun Ultra 80 keeps shutting down!

    Hi Gaz If it's not due to a hardware fault check that autoshutdown isn't enabled. The daemon is powerd The configuration file is power.conf power.conf may be set to 'autoshutdown' instead of 'noshutdown', you can change this and then run pmconfig to read the power.conf file. Worth checking.
  3. laytrotter

    remove partially installed packages

    Try re-installing the package again and then removing it.
  4. laytrotter

    Booting off CDROM

    Hi - sounds like the cd is not bootable for some reason, maybe it's because the Solaris 10 cd is actually a DVD and the drive in the server is only a cd drive (ie. it can't read DVD's). Worth checking.
  5. laytrotter

    V480 RSC reset

    Hi - I might be misseing the point here when you say "really reset an RSC card" but..... login into the rsc port on the rsc card user login is 'rscdam' (you might need a password) type 'resetrc' ....will reset the rsc card. Hope this helps.
  6. laytrotter

    PCI errors on ultra80.

    Hi Popkorn - looks like I was having a bad day yesterday, rushing around doing too many things Ooops!. 1f,2000 is Slot 1 -my apologies. Here is a list of device paths for the Ultra80:- Ultra 80, 420R, NETRA t 1400/1405 PCI Slot 1 /pci@1f,2000/<device>@1,*...
  7. laytrotter

    PCI errors on ultra80.

    Sorry, Sorry, Sorry - IGNORE the last post! Slot 3 on the Ultra80 = 33Mhz only 32/64bit 5volt. You card may be a 66Mz card. Laytrotter.
  8. laytrotter

    PCI errors on ultra80.

    A liitle more info:- Slot 3 is 33/66Mhz 64bit 3.3v - is your card compatible?
  9. laytrotter

    PCI errors on ultra80.

    Hi ereport.io.pci.dpe ena=e7ddcb874400c01 detector=[ version=0 scheme="dev" device-path="/pci@1f,2000" ] pci-status=c2a0 pci-command=146 As pci@1f,2000 is pci slot 3 I would remove the card from there and leave it out for the time being. You need to see if the machine is stable with slot 3...
  10. laytrotter

    cleaning plux in VVM

    Some useful info on IOFAIL - you may have a problem with the disk. IOFAIL Plex State The IOFAIL plex state is associated with persistent state logging. When the vxconfigd daemon detects an uncorrectable I/O failure on an ACTIVE plex, it places the plex in the IOFAIL state to exclude it from...
  11. laytrotter

    cleaning plux in VVM

    Hi if the above doesn't work could you post a 'vxdisk list' output?
  12. laytrotter

    cleaning plux in VVM

    Hi try this on the plex in question... #vxmend off plex_name #vxmend on plex_name plex shoudl now be in DISABLED STALE state #vxrecover -b volname #vxtask list ..to check recovery progress
  13. laytrotter

    System not booting due to memory problem

    Is it a module failure or does it ust need a re-seat. Mark the suspect module and then swap it with another module in a different slot. See what happens.
See more

Part and Inventory Search

Back
Top