Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations derfloh on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Recent content by lavinpj1
-
Cisco 2620 WIC-1ADSL
Hi all, Thanks very much for the help but I've gotten it working. It just required me to set ip unnumbered fa0/0 on Dialer1, assign the IP manually to fa0/0 and set the ip default-gateway manually also. Only downside is, the ISP expects everyone to use dynamic assignment so if they change the... -
Cisco 2620 WIC-1ADSL
I've thought about using a BVI interface, but I cannot see how I would do such. The IP must be on Dialer1 as that is what negotiates it. Phil -
Cisco 2620 WIC-1ADSL
A dirty DMZ is fine - that's all I want. Could you possibly advise me on how I would be able to bridge like that? I have previously tried bridging by creating a new ieee bridge and assigning fa0/0 (with no IP) to it as well as Dialer1. I then tried bridging fa0/0 (with no IP) and ATM0/0. The IP... -
Cisco 2620 WIC-1ADSL
Hello, I have a Cisco 2620 with a WIC-1ADSL card installed. This works all well and good (it can ping and be pinged) with this config: http://paste.pchowtos.co.uk/?id=1744&key=9924f341fc43d My ISP has assigned me a /28 of public IPs and requires the router to negotiate an IP with them at the...
