Recent content by lanstein

Can you post your e-mail and I'll forward you what I have? Thx

Hi Brian... we actually bought some parts from you... I had sent an e-mail to Bill since I remembered you guys buy systems also.

It's been great for us... no problems to speak of... I also realized I forgot to say it has a 6 port fiber combo card and also a services/clocking card. We are switching over to an asterisk-based VOIP system because it is cutting our bill down from around $2500 a month to about $400. We have...

It's a MICS 6.1 system with: 2 T1 cards 2 analog line cards Trunk mod 2 fiber station mods 1 fiber analog station mod Callpilot 100 SMDR 6 FastRAD 40 7316e sets 1 CAP w/power supply 1 7324(?) forget the exact model

Boston

Well this forum has helped me a number of times with my MICS, so I figure I'll give it a shot for my last problem... does anyone buy used systems or know of a good place to sell mine?

2 problems - one was nailed down by March71 - the poster is trying to say the length is 7260 when the length should be 4. That's problem #1. Problem #2 is a conflict between the hunt group DNs (by default they start with 7) and the DID numbers. However, bwtc posted the solution to that which...

Adrian you should program a button on the phone and label it "Outgoing". To program it on the set, from that set press Feature *3, press the button you want, then press Feature and enter 649 (64 + 9 is the pool code). You can also program from the administrator mode (feature **266344, default...

We use a company called MusicWorks: http://www.gomusicworks.com/mwincorporated.htm They also do the actual music recording.

I would do that but I'm going to have 30 of them and I'll trip and kill myself in my phone room....

I have a MICS 6.1 system. We are slowly converting staff to a new system, so I'd like to off-premise forward extensions to the new switch. It works if the sets are plugged in, but I'd rather not have 2 sets on every desk if possible. Is there any way to redirect a set to an outside # if the...

Okay I'll give that a shot. My telco is a bunch of tools for the most part and they told me there was no problem one day when I had no service and their own repair # didn't work.....

Faxing seems to work okay from 1 DN to another. I checked the logs and I'm getting errors 323, 325 and 330, but the timing of the errors (roughly one of these every other day) doesn't seem to coincide with the fax problems. The fax problems happen about 25% of the time (about 5-10x per day)...

So I switched the primary/secondary clocking source from one T1 card to the other and that didn't seem to help. I'm going to try to disable one of the cards at a time and see if a bad card is the issue.

I have a MICS 6.1 with a Services Cartridge, Combo card, and 2 T1 cards on the KSU, plus a trunk mod with 2 analog line cards, an extra station mod, and an analog station mod. I am having problems with dropped faxes recently on 3 different machines, all connected to the same ASM. We didn't...