Recent content by lanman1865

We are getting tons of coennections from obvious spam and i am not relaying. How can i prevent this. I have all the filters on IMF etc.. I have been adding some of the ip that show up more in the logs to the connection filter to dent them, but still getting these. I tried limiting the...

i figured it out, leave infostore running and dismount db.

Try to rename the default database before moving users to it. since the option is greyed out i tried in shell, but get error. also trie dthis while info store is stopped and then rename files manually and move them. cmdlet move-DatabasePath -Identity "C:\Program Files\Microsoft\Exchange...

I have had no luck and wonderinfg if anyone knows How do you find a group by a SID? to search AD with a SID to find the group name.

I reset the rsa, or atleast i think i did. I need to change the ip settings using the ASU utility. After I changed them, how do you save the settings before rebooting the rsa?

Ok. So all AP's will be on vlan4. Create all vlans needed in the 1231 AP vlan1(native) and vlan4. Now should i make vlan 4 native in the AP since all the AP's are to be on that vlan? On the 2960 i configured the port through the web gui using the smartport manager. Do i really need qos? The...

basically all wifi is on vlan4 all swithces,routers are on vlan1. vlan2 pc's, vlan3 servers. cisco 2960 interface FastEthernet0/1 switchport access vlan 4 switchport mode access switchport nonegotiate interface GigabitEthernet0/1 description Uplink to core switch 3560 switchport mode...

We are replacing all switches that are nortels to cisco 2960's. I am not sure what config changes i need to do with the 2960 and a 1231 ap. If you apply smartport options, the 2960 trunks that port for the AP to connect to. Our network is 4 vlans. 1(mgmt),2(pcs), 3(servers),4(wifi). the core...

I did in my test environment. 2 policies XYZ Users XYZ DL that worked, but to avoid the priority and how RUS works, I was hoping to use a single policy and not effect the other users and DLs used by other child domain. thx

I have an exchange 2003 org that has multiple smtp address's each has it's own recipient policy. Also the forest is has multiple child domains. For example. A.com is the root. A.1.com and A.2.com are just 2 child domains. Each has it's own exchange server to handle the users. Users is A.com and...

10.251.193.133 is circuit router to DATACENTER(A) PIX Version 8.0(2)19 ! hostname PIX domain-name ABC names ! interface Ethernet0 speed 100 duplex full nameif outside security-level 0 ip address A.B.C.D W.X.Y.Z ! interface Ethernet1 speed 100 duplex full nameif inside...

I have a site to site vpn tunnel between PIX and ASA. ASA is in data center(B). The pix is at a DR remote site.The core switch is a 3560 in (B) with static routes to our corporate data center(A), which is connected by a dedicated circuit(cisco 2600). The 3560 has a static route to the ASA for...

i figure it out. thx

I have a new exchange server in a child domain na.abc.grp. I am missing the Public folder tree and public store defaults. Do you have to create those? If so, it says Public Folders is not unique and i can't name the tree that due to "Public Folders" being in the root domain abc.grp...

I need to setup connectors and possibly a routing group to allow email to be delivered to migrated mailboxes and also to allow those to send mail. That is use current exchange to allow mail to be delivered to new exchange server and allow new exchange server to send mail through current, until...