Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations derfloh on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Recent content by LairdyBoy

  1. LairdyBoy

    9508 stuck on "Please Wait"

    Just had a similar situation on site, 1x 9508 powered up but would not load firmware. Checked the module and one of the legs of the Blues was loose, punched it down then the phone upgraded!!!
  2. LairdyBoy

    9508 stuck on "Please Wait"

    Under System settings, System tab check that "Phone File Server Type" is set to Memory Card. If you have moved the config from V1 to V2 I think from memory it says Manager!!
  3. LairdyBoy

    Where can I purchase an IPOSS contract?

    Hi itguy604, You will need a reseller/partner go to http://www.avaya.com/uk/partner-locator/ to find a local reseller. LairdyBoy
  4. LairdyBoy

    ContactStore Upgrade 7.2.09 to 7.8.16 / Wizard gets interrupted after clicking 'Ok/Yes' to upgrade

    Hi msprakes, What OS is installed on the server and service packs? LairdyBoy
  5. LairdyBoy

    Not able to Start One x portal

    After the install and it asks to start the service you have to leave it for at least 20-30mins (sometimes longer) before it is accessible and for the the service to been seen on the server.
  6. LairdyBoy

    SV8100 SL1100 Call Forwarding

    Whats is probably happening is there call forward to voicemail was just a normal call forward so when they changed it to mobile it turns off the Voicemail forward. You need a button called "79 - In-Skin Automated Attendant" with Add data to there voicemail number (extension number), this button...
  7. LairdyBoy

    Sv8100 call forward off premise

    Easiest way is to create a Speed dial for the number, remember what bin/speed dial number it is. Then on target 3 of the DDI Routing Table (guessing target 2 is for IRG group) put in 1000 = to bin 000 if its in another bin then 1 followed by its bin/speed dial number. Will also need to enable...
  8. LairdyBoy

    IPO 8.1 Pause recording

    Think my work mate has cracked it!!! They are using 5410 phones which is apparently not supported on pause recording!!!!!!
  9. LairdyBoy

    IPO 8.1 Pause recording

    Hi, The pause recording button is not working on a customer system, we upgraded them to 8.1 (69), contact store and VM pro. The calls record OK and can be played back on contact store. When the button is pressed it beeps. Tried it on our in house system and can get it to work OK. Spoken to...
  10. LairdyBoy

    Voicemail Lite As A Service

    Hi, The link is on the first reply as a hyperlink on the word HACK. LairdyBoy
  11. LairdyBoy

    Where can I download the DECT phone

    ftp://ftp.neci.co.uk/TechDVD/SV8100/SV8100%20R8%20Tech%20DVD/Software/Firmware/SIP%20DECT/ For software and firmware ftp://ftp.neci.co.uk/TechDVD/SV8100/SV8100%20R8%20Tech%20DVD/Manuals/ for manuals
  12. LairdyBoy

    Embedded Voicemail messages cutting off

    Make the customer delete any old messages, the card could be getting full and hasn't gone through maintenance mode to delete all old/unsaved messages. Think it completes it every 24 hours.
  13. LairdyBoy

    SV8100 / Wireless DECT IP phones / Occasional one-way speech path

    Is only the IPLA card (VOIP card) connected to the network? also is there enough IPLA resources on the card, they come as 32, 64 and 128 channels. So 32 channels requires 2x IP's addresses, 64 requires 4 IP's addresses and 128 requires 8 IP's addresses. If the CCU lan port is also connected...
  14. LairdyBoy

    How can i record calls from NEC UNIVERGE SV8100

    Mycalls uses a usb box that sits between the SV8100 and the service provider (phone TAP) to record its calls.
  15. LairdyBoy

    porting numbers from Nortel to Cisco

    Which Nortel and cisco systems? On option 81c/CS100 it has been done with DSC (Distant Steering codes) think its ld87 but requires a link from the nortel to the cisco. so each dn will have a DSC to the Cisco.
See more

Part and Inventory Search

Back
Top