Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations wOOdy-Soft on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Recent content by l3stuff

  1. l3stuff

    Seemingly Simple SQL Question

    Dear all I have two table, containing company info, and company employees, let's say (tables) 'Comp_list' and 'Comp_Emp' In 'Comp_list' we have a field called 'Comp_list.Comp_name' and in 'Comp_Emp' we have a field 'Comp_Emp.Employer' I want my query to just return those companys in...
  2. l3stuff

    Cisco switching mode

    all store and forward
  3. l3stuff

    WCCP on 6500/MSFC Native IOS

    yep...
  4. l3stuff

    Can you spread a vlan over a t1 link via cisco routers?

    please just remember why we moved from bridged broadcast domains to routed segmented broadcast domains
  5. l3stuff

    Cisco 2600 Series Router

    ok so it got changed in 12.2, let me work out the new sequence, should have time tomorrow..
  6. l3stuff

    Dumb telnet ?

    UPK - you seem to keep "hoping" on the back of other threads with your own questions... Please (if this is what you are doing) stop. Open your own threads...
  7. l3stuff

    1720 - Two IP's on same FastEthernet interface

    Please add the "ip route-cache same-interface" command....
  8. l3stuff

    using 2 isp on single router

    as long as you leave the load balancing within CEF to the default of per destination you should be ok, DO NOT ATTEMPT PER PACKET LOAD BALANCING! You may well get be asymmetric routing, but without running BGP to your ISP's you can't do anything about that..
  9. l3stuff

    How can I tell if my cisco router is bad?

    0x2102 is fine It's your cable........
  10. l3stuff

    Simple Question

    ok, hang on a sec, if you have a full E1 is it channalised or not???
  11. l3stuff

    WIC-1-ADSL - Problems accessing the internet

    it's true that un-numbered will therefore assign your LAN interface to the Public WAN address, but that isn't your problem. Your devices (PC's) need to be in the same subnet as your LAN interface, in your case the 192.168.254.0/24 subnet. When the packets from the PC's go out of the router...
  12. l3stuff

    Cisco 2600 Series Router

    wanna know how to make it ESC? ;)
  13. l3stuff

    Cisco 2600 Series Router

    LoneGamer if you knew the boot sequence you'd know that's what my message does.....How, well having spent the last 9 years building the things may have something to do with it - at cisco, not from a ccna manual... from the boot rom - rmonitor (you do this by hitting the ESC within 60 seconds...
  14. l3stuff

    Problem in ISDN backup

    floating static routes where designed for this application. Basically you point a static route at the ISDN Dialer, when the dynamic routing protocol hellos are missed the static route (which has a higher admin distance than the IGP) kicks in, dials the connection and provides your back up circuit
  15. l3stuff

    Automated telnet scripts

    sounds much more like a case of configuring BGP correctly with your ISP's to handle this issue
See more

Part and Inventory Search

Back
Top