Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Rhinorhino on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Recent content by kyleheath

  1. kyleheath

    Cisco 857 PPTP VPN Server

    Here is my current config Building configuration... Current configuration : 10854 bytes ! version 12.4 service config no service pad service tcp-keepalives-in service tcp-keepalives-out service timestamps debug datetime msec localtime show-timezone service timestamps log datetime msec...
  2. kyleheath

    Cisco 857 PPTP VPN Server

    Thanks Andy, still stuck at the authentication side, but Im putting this down to a lack of Cisco knowledge so I guess I either need a config that is setup for this on an 800 series so I can work it out, or its the books for me and a sharp learning curve! If anyone has a Cisco 800 series with...
  3. kyleheath

    Cisco 857 PPTP VPN Server

    Thanks Andy, I only have one PC to support at this site so need to use the local authentication rather than an IAS Server, I can get a response to a PPTP VPN now but the debugging on the router shows cannot process authentication server Radius UNKNOWN Which suggests to me I havent setup aaa to...
  4. kyleheath

    Cisco 857 PPTP VPN Server

    I would like to setup my Cisco 857 router to accept incoming Windows PPTP VPN connections, is there a standard setup for this as I cannot fidn any mention of PPTP VPNs in the SDM, it is all IPSEC. I have put some commands together from websites and managed to accept PPTP incoming calls, but the...
  5. kyleheath

    Cisco 857 WAN Management

    Thanks for your help, I found it was the ACL that I needed to amend to allow http access from my public ip to the ADSL interface for the www protocol, once I enabled this I could connect via SDM. Ill get to work on HTTPS now. Thanks
  6. kyleheath

    Cisco 857 WAN Management

    Thanks for that info, I have enable the HTTP server and I can connect via http on the local ethernet interface, its the wan interface i need to connect on, when i try to use the SDM to the WAN IP i only get prompted for the SSH login and not the HTTP login. Is it easier to start to try to setup...
  7. kyleheath

    Cisco 857 WAN Management

    I have just started working on Cisco 857 Routers to replace existing ADSL Routers, I have setup the PPPOA connection and a IPSEC VPN tunnel to my SBS 2003 Server however I cannot work out or succeed at connecting to the router via the WAN interface for remote support. I would like to use the...

Part and Inventory Search

Back
Top